Red RC » P Off Road

December 22, 2024

Schelle 16mm XTR pistons

New from Kurt Wenger’s Schelle Racing Innovations brand are these 16mm XTR pistons with custom valving that utilises the proven MIP Bypass1 platform. The pistons, made in Covina, CA at MIP, are a custom spec design that is not available anywhere else. The new 4 hole rebound valving gives racers a wide range of tuning that is very forgiving, making it harder to take your buggy out of the setup window. The heart of the design is the signature Schelle 5 hole bump valvings, based on tuning a base 5 hole piston (1.4F, 1.5R). In 2024, Wenger and the team expanded the options going up and down in pack a tiny step from the standard baseline, adding 2 new options to fine tune for smooth tracks as well as un-groomed outdoors. Piston O.D. and 2.5mm thickness is based on the “H” Hi-Flow profile. The unique Bypass1 system was the perfect way to add extra tuning to the rebound stroke of the shock and improve jumping, prevent wheel hop, all while keeping the vehicles smooth and predictable in turns. Racers can use MIP’s patented Bypass1 system with coloured valves to fine tune the rebound speed engineered to work in a wide range of conditions and take full advantage over the Xtra Tune-able Rebound (XTR!) of the system.

View piston options and features here

December 20, 2024

Team Cayote Crest X 1:10 Racing ESC

Electronics newcomer Team Cayote, which is being headed up by Oscar Jansen, has officially released its Crest X Racing ESC for 1:10 onroad/offroad use. Boasting a team driver line-up that includes Marc Rheinard, Atsushi Hara, Jilles Groskamp and David Ronnefalk, who have been developing products over the last number of months, key features of the Crest X start with it being designed for professional competition and optimised for the most demanding race conditions so that it delivers superior braking control and stability. With Seamless Sensor/Sensorless Mode it will effortlessly switch between sensor and sensorless modes to suit your driving style and maximise efficiency. With Multiple Protection Mechanisms, it is built with advanced protection functions to extend the lifespan of your ESC and ensure safe operation. The ESC’s Core Tech includes a Super Large 48-degree Boost & Turbo Timing for increased power output and optimised motor efficiency. Offline Data Recording allows you to track the ESC’s performance to let you make informed decisions. With over 33 Adjustable Parameters this supports various power and drive modes.

View Specs here

December 19, 2024

LRP new Weights Series

Just in time for the carpet season, electronics brand LRP has released a new Weights Series. Made of black burnished brass with a high specific weight, thry have made several improvements, such as optimised dimensions and nicely rounded corners. The weights allow the chassis to be perfectly tuned to ideal weight distribution, no matter what type of battery is used, while lowering the centre of gravity. The lower centre of gravity improves the handling of your car. Available in the most popular weights for standard and shorty batteries and speed controllers. The new super thin double-sided tape pads, 40x40x0.2mm, allow the weights to be attached to the underside of the battery or speed controller with only a minimal increase in the centre of gravity.

Source: LRP [lrp.cc]

December 18, 2024

Power HD Balance Weight Crawler Servos

Power HD has released a new Crawler servo series that includes two Balance Weight servos. The cases of WT162 and WT120 are made of pure brass material and can be used directly as balance weight servos. When used in a simulated crawler frame designed with a servo on the beam, the weight on the beam can be heavier and the posture of the whole car can be better. Used in a competition performance crawler frame designed with a servo on the bridge, the weight on the bridge can be higher and the crawling performance can be better. Both WT162 and WT120 use brushless motors and support the Flysky i-BUS2 protocol. The servo status can be directly observed on the Flysky NB4 series radio in real time, and the servo parameters can be programmed on the radio. WT80 and WT85 use aluminium heat sink case, and the servos on various crawler frames have strong torque and speed, and the performance is also excellent. WT series servos are all made of steel gears, IP67 waterproof, durable, and can be used in various environments and perform well in 1:10 and 1:8 simulation crawlers and competition crawlers.

View more images here

December 17, 2024

Factory Team RC8 Titanium options

Factory Team has released a number titanium upgrade parts for the RC8B4.1 and RC8T4 platforms. These products reduce the overall weight of your vehicle while retaining overall strength in harsh conditions. No additional hardware is needed for installation and parts also boast a great appearance with a machined titanium finish. The shock pins have been designed with threads and a 5.5mm hex to allow for easy threading into the suspension arms. The package comes with two right-hand threaded pins and two left-hand threaded pins. The left-hand threaded pins are denoted with an “L” inscribed on the head. Proper installation is achieved by always putting the left-hand threaded pins on the front right and rear left. Cumulative weight reductions over the kit steel part are 2 grams for the Shock pins, 3.3 grams for the Brake cams are 3.3 grams and 6 grams Steering posts.

Source: Associated [associatedelectrics.com]

December 13, 2024

JConcepts RC10B7 Steering Kit

JConcepts has introduced a new steering bellcrank system for the Team Associated RC10B7 2WD Buggy. Available in blue or black anodised finish, it allows the driver to adjust the height of the steering rack ball-stud instead of the bellcrank system. A quicker adjustment for the racer and less disassembly required each time, the steering rack features a steel insert that can be oriented in an upper or lower position mimicking the standard adjustment of moving the bellcranks up or down. The all-metal and machined parts combine to form a solid package capable of being tuned quickly.

Continue reading here

December 11, 2024

Schumacher LD3 | L1R High Performance Slipper Pads

New for Schumacher their Cougar LD3 and CAT L1R buggies are these High Performance Slipper Pads. These optional slipper pads are made from an ultra low friction material which reduces temperatures, improving consistency and confidence with slipper clutch settings. Aimed as an improvement on all surfaces from soft to tight settings, it keeps consistent performance over multiple runs. They fit all Schumacher slipper clutches on Cougars and CATs.

Source: Schumacher [racing-cars.com]

December 10, 2024

Aerox Bat-Safe box

Aerox, the accessories brand from Schumacher, has released this Bat-Safe for the charging & storage of LiPo batteries. LiPos can be dangerous and the Bat-Safe provides the safest experience whether it will be storing, transporting or most importantly charging. Highly recommending all LiPo batteries should be charged and stored in a Bat-Safe box and not a LiPo bag, Schumacher Racing are no longer selling LiPo Bags as they don’t believe they offer adequate LiPo fire protection. The Aerox Bat-Safe is a double-walled insulated steel box with a flame arrestor. Any battery within the specifications will not be a fire hazard if charged or stored inside it and in case of a fire, the smoke and soot is also filtered by the flame arrestor.

View more images here