Red RC » P Off Road

December 18, 2019

Xray XB’20 LCG aluminium shock towers

Coming from Xray and made for their XB 2020 2WD off-road buggy are new low centre of gravity aluminium shock towers. Machined from Swiss 7075-T6 aluminium the shock stays fit both the Carpet and Dirt edition kits and they offer updated upper shock mounting positions with the rear tower also featuring three different wing height mounting positions. The rear variant fits both LCG gearbox configurations and like the front shock stay, it is machined of 3mm aluminium and comes black anodised for wear and looks.

View the rear shock tower here

December 18, 2019

Yeah Racing release new crawler optionals

Yeah Racing have released new optional parts foe the Traxxas TRX-6 and Axial SCX10 II trail trucks. First up is a 3-piece set of stainless steel differential protectors for the TRX-6 6-wheeler truck. The plates are direct bolt-ons with no modification required and they sports laser-etched YR logos for looks. Made from stainless steel the skid plates offer utmost protection for the standard composite diff and axle housings while adding some visual impact.

Continue reading here

December 18, 2019

Bittydesign S35-3E Vision body shell

Coming from Bittydesign and made for the SWorkz S35-3E 1/8th electric buggy is the new Vision body shell. The lid is of a refined design that makes the buggy easier to drive thanks to optimised balance while the special cabin shape improving cornering speeds. Not being left out is the overall design with the Vision featuring signature, futuristic lines that also leave ample room for the car’s battery. The pre-cut body is moulded from high-quality 1mm thick Lexan polycarbonate, it comes clear, including window masks and a decal sheet and readily cut-out including body mount holes for an instant fit.

View more images here

December 18, 2019

XactRC YZ-2 DTM3/CAL3 ball-raced steering link

XactRC have announced the release of their new steering link system for the Yokomo YZ-2 DTM3/CAL3 vehicles. Developed, tested, and made in the USA the redesigned link will feature four flanged 3x7x3 ball bearings to minimise slop the steering rack assembly. This will help in low and high speed areas for both dirt and carpet racing. The aluminium link will also provide more consistency, overall performance, and less maintenance. Easy to install, using same washer setup and ball studs as the plastic link given with the YZ-2 kit. This product is the first of many racers oriented performance parts that XactRC will come out with.

View another image here

December 17, 2019

Tekno RC 1/10th Delrin shock pistons

Tekno RC have announced the release of three new CNC Delrin piston sets to fine-tune the performance of their 1/10th scale vehicles. The pistons improve the consistency and handling of the EB410.2 and ET410 vehicles as the pistons are machined from self-lubricating Delrin plastic, flat on both sides and drilled with eight 1.1, 1.2 or 1.3 millimetre holes. Intended to replace the moulded kit pistons, they are a direct fit for the shocks on all EB410 and ET410 vehicles and do not require any additional hardware.

Source: Tekno RC [teknorc.com]

December 17, 2019

Xray XB4’20 large volume diff 41T steel bevel gear

Coming from Xray and made for their XB4 2020 1/10th scale 4WD buggy is a 41T steel bevel gear. Designed for the use with the kit’s large volume differential, the precision-cut gear is best used when smaller front tyres are run, as the 41T bevel gear will result in an overdrive characteristic that will help to compensate for the larger rear tyres. The split design of the gear differential features a separate lightweight crown gear and a separate diff cover. The split design results in significantly lower weight and allows for easier maintenance and setup. The crown gear is CNC-machined from spring steel and ultra-hardened, making it super strong, reliable and very durable.

View another image here

December 17, 2019

Kyosho Mini-Z 8500kV BL conversion set

Kyosho’s Mini-Z brushless conversion set 8500kV allows to easily convert brushed motor Mini-Z buggies to brushless power. The set includes a Speed House XSpeed 85 8500kV brushless motor as well as a new power board, developed in cooperation with Scorpion Power System, with the actual swap being basically a plug and play, however it requires to solder the battery wires. The powerful motor allows for much greater speeds compared to the standard brushed motor while being more efficient at the same time.

Source: Kyosho [kyosho.com]

December 17, 2019

Yeah Racing SW-01 steel CVD set

Made for Tamiya’s SW-01 stunt truck is a new Yeah Racing steel CVD driveshaft set with aluminium wheel hex adapters. The steel driveshafts provide increased durability and enhanced efficiency compared to the standard dogbone style driveshafts, allowing for improved overall performance and a smoother ride. The addition of the aluminium wheel hex adapters also does away with stripping issues associated with the original plastic hexes. The driveshaft set is available with blue or black anodised wheel hex adapters for added looks.

View more images here