Red RC » P Off Road

December 16, 2019

RC-Project S35-3 series Valente Edition V2 steering kit

Coming from RC-Project and made for the SWorkz S35-3 series of vehicles is the Valente Edition V2 Ackermann steering kit. The set was developed to optimise the steering characteristics of the vehicles for more consistent cornering and increased cornering speed while optimising entry and mid-corner bump handling. Part of the package are redesigned outer steering spindle plates that offer two different steering link positions, the standard “S” marked position for high-grip and a new aggressive “A” geometry for slippery tracks. The set is machined from high-quality 7075-T6 Ergal material, the parts come with a red surface coating for wear and looks and also included are Reverse-type pivot balls whose updated geometry fine-tune the whole steering system. The set is usable for the S35-3, S35-3E, and S35-GT kits.

Source: RC-Project [rc-project.it]

December 16, 2019

Exotek Tenacity Pro HD steering set

Exotek have introduced their new Pro HD steering set for the Losi Tenacity 1/10th scale vehicles. The heavy-duty pro style steering set includes steering bellcranks, servo crank, drag link, bearings and hardware. It is robustly designed and engineered to offer precise action thanks to the machined 7075 alloy design that incorporates an additional four bearings to connect the steering rack, instead of bushings, which eliminates friction wear and slop. The set includes crush sleeves that go between the bearings which help prolong the bearings life and maintains precise fit and operation of the rack. Also included are four 5×8 bearings that replace the stock brass bushings. The steering kit is compatible with the Tenacity, Tenacity T, SCT and DB.

View another image here

December 16, 2019

Samix Enduro brass rear weight set

Coming from Samix and made for the Element RC Enduro trail trucks is a brass rear weight set. The 2-piece weights add 92g of weight to the lowest part of the truck which helps to greatly lower the overall centre of gravity while helping to improve rear traction and stability. The weights are designed to clamp around the rear axle housing, they sport a black surface coating for corrosion resistance and machined edge details for looks. Due to their design it is also possible to run two rows of weighs per axle, adding a total of 184g of weight.

View more images here

December 16, 2019

Trinity 30mm & 40mm aluminium fans

Available now from Trinity are their new 30mm and 40mm aluminium fan units. The fans utilise machined aluminium cases in a heatsink design which allows for additional cooling surface when directly coupled to motor or speed controller cans or cases. The 30mm fan is of a 2-tone black and blue design while the 40mm unit comes in a black and silver finish. Both utilise all-black wires for a stealthy factory look.

View the 40mm fan here

December 16, 2019

Fantom FR-10 Pro 2S & FR-1S Pro speed controllers

Fantom Racing have announced the release of their new FR-10 Pro 2S all-black and FR-1S Pro 1S brushless speed controllers. Both are rated at 160A with the 2S variant being 2019 ROAR 13.5T 4WD, 17.5T 2WD and 17.5T Short Course national champion in the hands of Dreighton Stoub. The 2S variant features a new all-black case for a stealthy look while 11 AWG ultra-low resistance wires ensure minimal power loss in modified class. A 32-bit high-performance CPU, adjustable 6V/7.4V BEC system and on-board power button round out the package.

Continue reading here

December 16, 2019

Hobbywing XeRun XR10 Pro G2 Elite speed controller

UK Hobbywing distributors Schumacher have announced the release of the XeRun XR10 Pro G2 Elite brushless competition speed controller. Building on the proven XR10 Pro G2 the Elite version comes with 13AWG wires and no external switch, however the remainder of the features remain the same such as high-performance 32-bit M4 microprocessing for super-fast and precise control while built-in reverse battery polarity protection saves both the controller and battery when things are getting a bit hectic in the pits. Other proven features include greatly improved G2 hardware, software features such as a greater PWM frequency range for throttle and brake, ensuring optimised control when needed. Also part of the firmware are finer adjustable turbo increase and decrease rates as well as a 101 percent to 150 percent brake range, a feature that comes in handy when running high-turn stock motors with aggressive gear ratios. New for the G2 is also the ability to adjust motor rotation direction and the built-in BEC system offers adjustable 5V to 7.4V and 10A output. Last but not least comes a softening function that will improve vehicle control in high-power modified classes. The controller is programmable and upgradable using Hobbywing’s WiFi Express module and an iOS or Android mobile device with a more traditional programming box being also available.

Source: Schumacher [racing-cars.com]

December 16, 2019

Team Zombie Evo 540-class brushless motor

Team Zombie have introduced their new Evo 540-size brushless motor. It features a unique 1-piece aluminium can that covers most of the stator, however it leaves open the large alloy insulator which ensures improved overall cooling. The endbell also sports cooling openings to further improve airflow through the can especially when used in 4WD off-road classes. A new stator design optimised the power curve, making it more linear which is essential for a more connected throttle feeling. The motor weighs in at around 150g, making it not the lightest, however with modern mid-motor touring cars being in need of weight in around the electronics area, it allows to achieve a balanced weight bias easier. Other features include 2mm thick ultra-low resistance solder tabs as well as high-precision ball bearings. The motor will become available in popular stock windings such as 13.5T and 17.5T.

View more images here

December 16, 2019

Mx B4R Euro Edition .21 nitro off-road engine

Coming soon from Maxima is the Mx B4R Euro Edition .21 nitro off-road engine. No official information on the engine’s specifications is available yet but the cooling head will be decorated with famous European symbols and the engine itself will be hand-modified to ensure best possible performance. We bring you full information on the new power plant as they become available.

Source: Maxima Mx Europe [facebook.com]