Red RC » P Off Road

November 21, 2019

ProTek RC 34mm 4-shoe off-road clutch sets

ProTek have announced the release of their new 34mm 4-shoe off-road clutch for 1/8th buggies and trucks. The premium level clutch features a 34mm aluminium 4-shoe flywheel with removable steel pins so drivers can replace them when needed. A complete set of four 1.0, and four 0.9 springs are included, so owners can mix and match spring rates as needed to tune the engagement to suit the engine, track conditions and personal preferences. The clutch is available in two sets, with all 7075 aluminium or mixed aluminium and carbon shoes, both come with clutch nut and flywheel collet, creating an all inclusive high performance clutch system.

View the mixed shoe clutch set here

November 21, 2019

GForce Assault 7.6V LiHV LCG shorty battery packs

GForce have introduced their new Assault series low centre of gravity 7.6V LiHV shorty batteries. Available as 4600mAh pack, measuring 93×46×24mm and weighing in at 204g, and also as lightweight 3500mAh variant, measuring 93×46×18mm and weighing in at 155g, the two are ideal for demanding off-road and on-road applications alike. Both are built using high-quality 60C/110C cells, they feature protective hardcases and utilise 4mm bullet-type connector tubes.

View the 3500mAh variant here

November 21, 2019

Xtreme Racing Mojave carbon fibre shock towers

Coming from Xtreme Racing and made for the Arrma Mojave truck are front and rear carbon fibre shock towers. Machined from high-quality 5mm carbon material the towers replace the standard aluminium shock stays and they feature additional shock mounting holes for extra adjustability. The shock stays are available separately for the front and the rear of the vehicle.

View the rear shock tower here

November 20, 2019

Avid XB2C & XB2D 2020 bearing kits

Avid have announced the release of their new ball bearing kits for the Xray XB2C and XB2D 2020 2WD buggies. The range includes the Essential bearing kit, the XB2C and XB2C 2020 full bearing kits as well as the Aura Ceramic gearbox, Aura Ceramic hub and Aura Ceramic full bearing sets. The standard bearing kits are further customisable using Avid’s FlexKit software.

Source: Avid [avidrc.com]

November 20, 2019

Ruddog High Voltage standard size servos

Ruddog Distribution have introduced their new line of High Voltage standard size servos. First up are the RCL1608 HV Coreless High Speed (0.08s/18kg-cm) and RCL2210 HV Coreless High Torque (0.10s/22kg-cm) servos, both of which feature heavy duty composite material upper and lower cases combined with a machined heatsink design centre section. The result are exceptionally strong yet lightweight cases as titanium gear trains add to the overall durability while offering a very low weight. Other features include a coreless motor for speed and strength, 25T spline output gears as well as 180mm all-black receiver wires.

Continue reading here

November 20, 2019

Yeah Racing WR-02CB aluminium wheel cap covers

Yeah Racing have announced the release of their new aluminium wheel cap covers for the Tamiya WR-02CB kits. Machined from high-quality material the covers add a certain bling to the popular stunt vehicles and they are a direct fit with the standard kit wheels. The covers are usable at the front and the rear, they come in sets of two and are available in blue, green or black anodising with machined silver details.

View more images here

November 20, 2019

Kyosho MP10T hard composite lower arms

Kyosho have introduced their new hard composite lower arms for the MP10T 1/8th scale truggy. Moulded from a harder-than-stock material the arms come in handy especially when running in high ambient temperatures or when racing in high to very high bite track conditions. Using the harder arms results in more precise handling as they do not flex as much as the standard kit arms, however they can take away some overall traction and stability in colder conditions. The arms come as separate pairs for the front and the rear of the truck.

View the hard rear arms here

November 20, 2019

Helix Designs Volution on-road & off-road car stands

Coming from Helix are their new Volution on-road and off-road car stands. Fully designed and manufactured in the USA the car stands feature premium 3-D-printed sides with integrated O-rings for a non-slip bottom while the top carbon plate is equipped with custom laser cut foams to fit the shape of the carbon. A 2-colour 3-D-printed centre top plate makes for added visual impact. The car stand weigh in at an ultra-light 60g to 70g and they can be customised with a centre name pate, different screw colours, and non-slip O-rings. The on-road car stand is ideal for 1/10th and 1/12th scale on-road chassis while the off-road variant fits 1/10th 2WD and 4WD buggies.

Source: Helix Designs [helixrc.com]