MIP have introduced their new X-Duty centre drive kit for the Element RC Enduro range of trail trucks. The set is a direct replacement for the standard kit parts, offering increased strength and a high amount of durability compared to the plastic kit drives. Included in the fully rebuildable set are hardened steel telescopic design centre driveshafts, couplers, shims and all needed hardware.
Source: MIP [miponline.com]
Coming soon from Sweep Racing is their new Sweeper tyre for 1/8th off-road buggies. The tread is made up of countless mini pins, making it ideal for mid to high grip dirt surface. The Sweeper tyre has curved outer pins in order to offer a smooth cornering feeling and an easy driving feeling on high grip conditions. The wide centre pins make for extended durability and the newly designed V6 carcass provides a smooth car feeling on the track. The tyre is available in Gold, Yellow, Silver, Blue, and Red as well as all of the respective X compounds.
Tekno RC have announced the release of some new option and tuning parts that are designed to further enhance the performance of the NB48 2.0 buggy. First up are hard compound suspension arms that are made from a stiff composite material and are intended to be used in hot weather conditions or any time a more direct feeling is desired to sharpen up the handling. Tekno RC recommend using these arms when the ambient temperature is above 35 degrees Celsius but they are not as durable if used in temps below 5 degrees Celsius. No additional parts are required when replacing stock arms but they are 1mm longer and will require camber, toe, and bump-steer to be readjusted.
JConcepts have announced the release of their popular Blockers 1/8th buggy tyres in the new Aqua compound. The Blockers, a relative of the popular Stalkers and Reflex tyres, has an even tighter tread pattern for long main events or very abrasive conditions. The Blockers began with a Stalkers style pin which has slight angle on each side for separation at the top. This fine detail gives increased bite in wet conditions providing some versatility to the design. As the pins meet the base of the tyre, the spacing tightens considerably giving a stable footing for the Blockers. The additional pin real-estate provides a lot of cushion for extended main events and when paired with long-wear compounds such as R2, O2 and Aqua, the race pace can be pushed out to 45 to 60 minutes. The stacked row configuration and simple connected pins also offer massive forward acceleration. The aligned rows allow some surface drift making the tyres forgiving in sand and bumpy track sections. The outside pin has been clipped to help drive-ability and ease the initial turn-in drivers often have concern for. The tyres include the Dirt-Tech closed cell inserts and they come in a re-sealable, zip-top packaging.
Source: JConcepts [jconcepts.net]
Kyosho have announced the soon release of their new HD driveshafts for the MP10 1/8th off-road buggy. Available are 94mm wheel driveshafts, 116mm as well as 82mm centre driveshafts all of which are of a CV-style design with protective, red-anodised aluminium caps that both keep the cross pins securely captured while allowing grease to stay inside the assembly for longer, ensuring less wear and reduced maintenance time. The shafts fit the current Inferno MP10 and also the older spec MP9 models.
View the centre driveshafts here
RC-Project from Italy have introduced their new titanium shock standoffs for the Xray XB8 series of vehicles. Machined from high-quality 6Al4V titanium and featuring rolled threads for increased precision and stability, the standoffs are available as front -1/0mm and rear +3/0mm variant, allowing to fine-tune the shock angle according to the suspension’s caster and anti-squat settings which results in less stress on the damper’s piston, piston rod and body and therefore creates an overall smoother shock action with reduced internal wear. The front and rear standoffs are available separately and they come as pairs including shims to adjust the shock angle.
Coming from T-Works and made for Xray’s popular XB4 buggy is a rear stainless steel chassis protector. Machined from high-quality material the skid plate will provide protection when running on highly abrasive surfaces or on track with large jumps as it prevents the rear of the chassis from becoming overly scratched or damaged. The skid plate is a direct fit, using the original rear transmission case screws, and it comes in a set of two.
Source: T-Works [rc-tworks.com]
Samix have announced the release of an aluminium driveshaft cap set for the Element RC Enduro trail truck. Machined from high-quality alloy the caps improve the drivetrain’s rigidity and durability and they fit both the standard kit and Samix’s optional centre driveshafts. Included in the set, that is available in black and gun metal colour, are two thin and two thick caps. Laser-etched Samix logos complete the visual appearance.
