Red RC » P Off Road

October 27, 2019

Hitec DB777WP waterproof low-profile servo

Hitec have introduced their new DB777WP waterproof low-profile servo. Designed with a full metal, IP-67 rated waterproof case, the advanced, programmable servo is Hitec’s fastest low-profile option for 1/10th buggy and touring car drivers. The DB777WP is powered by a 32-bit micro controller unit and 12-bit analog to digital converter, bringing high resolution, rapid response, and patented Smart Sense technology.

View lists of the features and specifications here

October 25, 2019

RPM Super Rock Rey front spindle set

Coming from RPM and made for the Losi Super Rock Rey truck is a reinforced front spindle set. The parts have reinforced steering arm ribs that triangulate further than stock, strengthening the steering arm to unbreakable levels. RPM also increased the amount of support material surrounding the axle bearings to improve overall strength and crash survivability. To further the aesthetic appeal, RPM redesigned the brake calliper mounts for a cleaner, more finished look and made them lighter. In addition the stock, heavyweight 4mm king pin retaining screws were replaced with lightweight 3mm versions. This simple screw size change reduces the overall unsprung weight of the spindles by four grams without compromising strength. The spindles utilise the stock suspension geometry and are moulded from engineering grade nylons for durability.

View another image here

October 25, 2019

Avid clutch bearing line

Coming from Avid is their new line of clutch bearings. Clutch temperatures easily reach temperatures three times more than that of a wheel bearing and so they are specifically designed for use in clutches to withstand the high heat and loads. Balls are 20 percent larger than Avid’s standard bearing line and when combined with the deeper grooves in the races, racers get a ton more surface area to distribute the load. Grooves are made from 52100 and polished to a higher level of smoothness to keep friction down when at higher loads. Cages are made from nylon instead of steel so that during high heat expansion situations there is no chance of metal to metal rubbing which results in less drag, and better strength. The bragging are available as 5x10x4mm, 5x11x4mm and 5x13x4mm metal-shielded variants.

View the other bearing sizes here

October 24, 2019

Spektrum DX5 Rugged DSMR transmitter orange

Horizon Hobby have introduced the new Spektrum DX5 Rugged DSMR transmitter in a special orange edition. The 5-channel surface transmitter redefines radio control with a level of durability to match the tough conditions off-roaders, bashers and boaters encounter constantly. The designers started with a chassis based on the Spektrum ergonomic design found on the popular DX5C and competition favourite DX5 Pro. From there, they integrated cordless power tool feature ideas for the die-hard punishment those products endure. The result is an RC system with exceptional durability in addition to other innovative features that unite with a level of precision, versatility and convenience.

Continue reading here

October 24, 2019

Tekno NB48 2.0 carbon & brass optionals

Tekno RC have introduced new carbon fibre and brass option parts for the NB48 2.0 buggy. First up and designed to improve the look and handling of the NB48 2.0 buggy are carbon fibre shock towers. They add visual impact and can also improve bump handling and grip by being slightly more compliant than aluminium. When using front and rear carbon towers, the weight of the vehicle is reduced by 50 grams. This helps to slightly lower the centre of gravity and increases corner speed. At 5mm thick the shock stays are strong and easily withstand all but the most extreme race incidents.

Continue reading here

October 24, 2019

Sunpadow Phantom II Black Label LiPo packs

Sunpadow have announced the release of their new Phantom II Black Label competition LiPo battery range. Listening to the feedback of their factory drivers, the packs utilise a new technology and production process, making for improved performance while being more cost efficient for the customer at the same time. The range includes standard and shorty options with the standard size range coming as 8800mAh (25.1mm/308g), 6600mAh (23.1mm/312g), 6300mAh (23.1mm/288g), 6000mAh (23.1mm/295g), and 5600mAh (23.1mm/277g) variants. The shorty batteries are available as 2S 5100mAh (25.1mm/215g), 4500mAh (25.1mm/214g) and 4000mAh (18.5mm/157g) options and also as 8000mAh (18.5mm/155g) 1S 1/12th scale battery. All feature black hardcases with black labels and they come in zipped storage containers.

Source: Sunpadow [sunpadow.com]

October 24, 2019

Bezerk B74 Plus 1 steering arms

Made for the Team Associated B74 4WD buggy are Bezerk’s new Plus 1 carbon fibre steering arms. The plates will add more Ackermann geometry to the buggy, with this helping with more steer in slower corners while smoothing out high speed steering. Made from 2.5mm glossy carbon fibre the set includes two arms.

Source: Bezerk [bezerk.com.au]

October 24, 2019

SMJ Teflon battery tape

SMJ have introduced their new Teflon battery tape that will greatly lower the friction between the battery compartment surface and the battery case. Only 0.15mm thin the tape has a very low friction coefficient while not disturbing a low centre of gravity, ensuring the battery has way less influence in chassis tweak during cornering, ensuring more equal left-to-right chassis flex. The tape also offers protection to the chassis and battery case making both parts look fresh for a long time. SMJ recommend to place the tape on the lower side of the battery case instead of the main plate when running the latest breed of highly machined flex aluminium chassis.

Source: SMJ [smj-rc.com]