Red RC » P Off Road

May 23, 2019

Exotek RB7 HD laydown motor plate

Exotek have introduced their new stealthy 2-colour anodised 7075 motor heatsink for the Kyosho RB7 laydown 3-gear transmission. The heavy duty 3.25mm thick mounting plate is stronger than the stock plate therefore eliminating motor flex to insure better gear mesh and the black motor plate helps reduce your motor temps while the built in gear cover is stronger and easier to work on than the stock plastic cover to insure that the body does not press the cover onto the spur gear in hard tumbles. The customised polished black base with red chamfered accents goes great with Kyosho kit parts and the plate, that weighs in at 13g only, is also usable for the entire RB6 buggy and truck series using the laydown gearbox.

View another image here

May 23, 2019

MIP TRX Fiesta ST Rally X-Duty front CVD kit

Coming from MIP is the X-Duty front CVD kit for the popular Traxxas Fiesta ST Rally car. Featuring a strong splined X-Duty steel construction, the driveshaft kit gives extra strength for those that are into drag racing and thanks to being fully rebuildable, owners can easily replace components that have reached their end life. The parts are made of black oxide coated steel to protect the components from premature rust while the strong construction prevents ripped and twisted drivetrains.

Source: MIP [miponline.com]

May 22, 2019

Avid EB410/ET410 titanium shock standoffs V2

Coming from Avid and made for the Tekno EB410 and ET410 kits are the new FastTune titanium shock stand offs. They are replacements for the new #TKR6527B standoff that use the keyed shock bushings #TKR6780. They include Avid’s FastTune feature which allows to use a common 1.5mm Allen wrench to prevent the standoff from spinning while using a 5.5mm socket wrench on the other side. The other solutions out there require to either take the shock completely off the standoff to reach the 7.0mm nut or to use a 7.0mm open-ended socket wrench. In addition to being easier to wrench on they help to lose some weight from the highest point on the car by switching from steel to titanium. The set includes four shock standoffs machined from billet 6Al-4V titanium.

Source: Avid [avidrc.com]

May 22, 2019

Xray XB2 3mm aluminium shock towers

Xray have announced the release of new 3mm aluminium shock towers for the XB2 range of 2WD buggies. Machined from 3mm high-quality 7075-T6 material the shock towers are of an updated design with the front shock stay’s outer line being a tad smaller than the carbon part while retaining the standard shock geometry. The rear tower underwent a greater redesign with the inner shock mounting hole removed and an additional outer added. Also the shape is slightly different and a new lower wing mounting position has been added. The towers will improve drivability and precision when running on high-bite tracks and they are available separately from now on.

View the rear shock tower here

May 21, 2019

Fantom 8000mAh 7.6V Pro HV Silicon Graphene battery

Fantom Racing have introduced their new 8000mAh 7.6V Pro HV Silicon Graphene hardcase battery pack. Built from high-quality 110C/160C cells the battery measures 139x47x25mm and it weighs in at 321g. It comes pre-wired with a genuine Deans-type connector and is ideal for demanding applications such as high-performance brushless ready-to-run vehicles.

Source: Fantom Racing [fantomracing.com]

May 21, 2019

RC Carbon Cavalieri SRX8 carbon optionals

Coming from RC Carbon Cavalieri and made for the Serpent SRX8 buggy are several carbon fibre optionals. The range includes front and rear shock towers, an air filter guard as well as 0.5mm an 1.0mm arm inserts. All parts are machined from high-quality carbon fibre and they are designed to be a direct fit.

View the other new parts here

May 21, 2019

Xray XT4 1/10th 4WD truggy – Coming soon

Xray have announced the soon release of their all-new XT4 1/10th scale 4WD electric truggy kit. Based on the IFMAR World Championship winning XB4 4WD buggy the kit combines 1/10th 2WD stadium truck dimensions with 4WD forward traction for the growing class of 1/10th scale 4WD truggies. Full details will become available in time for the release.

Source: Xray [teamxray.com]

May 21, 2019

Yeah Racing 1/16 Slash HD steel driveshafts

Yeah Racing have introduced a set of HD tool steel front and rear universal driveshafts for the Traxxas 1/16 scale Slash truck. Made to replace the standard plastic parts the heavy duty steel items ensure greater durability and peace of mind during extreme bashing action.

Source: Yeah Racing [yeahracing.com]