Red RC » P Off Road

February 21, 2019

T-Works MP10 & MP9 aluminium centre driveshafts

Coming from T-Works and made for Kyosho’s Inferno MP10 and older MP9 buggies are several aluminium centre driveshafts that were developed to reduce the drivetrain’s rotational masses. The MP10-specific set includes 117mm and 85mm alloy dogbones while the MP9 TKI4/3 and MP9E compatible set comes with 115mm and 87mm long variants. Last but not least is a set specific to the MP9E Evo with 149mm and 56mm long driveshafts. All all made of high-quality 7075-T6 aluminium, they come with a black, hard-anodised surface for wear and also include high-quality outdrives. All dogbone driveshafts are also available separately for spares or repair.

View the other sets here

February 20, 2019

HRC Racing 14.8V 6000mAh LiPo battery pack

HRC Distribution have announced the release of the new HRC Racing 14.8V 4S 6000mAh hardcase LiPo battery pack. Built using high-quality 65C/110C cells, the battery is ideal for demanding 1/8th on-road and off-road racing thanks to its high capacity. The hardcase pack comes pre-wired with an industry-standard balancing connector and either Ultra-T or XT90 power connectors.

View another image here

February 20, 2019

SWorkz S35-3 pinion gear stopper set

SWorkz have introduced a pinion gear stopper set for the S35-3 series vehicles. The 5x7x5.1mm crunch spacers ensure a smoother running drivetrain by filling the space between the inner input bearings. The defined space between them will prevent the ball races from binding, which results in a more free running drivetrain.

View another image here

February 19, 2019

VSR 8ight-X 10mm wing shim

VSR Products have announced the release of a 10mm wing shim for the TLR 8ight-X 1/8th scale buggy. The addition of the shim elevates the rear wing of the buggy, creating more downforce and stability at high speeds and on large jumps, as well as bumpy tracks. The 3-D-printed shim comes with two metric screws to replace the stock ones.

Source: VSR Products [vsr3d.com]

February 19, 2019

T-Works XB8’19 titanium turnbuckle & screw sets

Coming from T-Works and made for the Xray XB8’19 buggy are a titanium turnbuckle as well as two screw sets. Starting with the turnbuckle set, the 7-piece kit is made of high-quality 64 grade material and it replaces the standard spring steel turnbuckles with lighter and more shiny items. Included with the turnbuckles come two suitable 4mm and 5mm wrenches. As for the screw sets, T-Works have released a 149-piece UFO head titanium and a 149-piece gold-colour steel screw kit. The latter will mainly add bling while the titanium set makes for more visual impact, a lower weight and higher corrosion resistance compared to the original steel fasteners.

View the screw sets here

February 19, 2019

Kyosho MP10 hard suspension arms

Kyosho have announced the release of hard compound suspension arms for the Inferno MP10 buggy. Made of a harder composite material and a direct replacement for the kit standard “S” types, the “H” arms offer less flex and are therefore the ideal choice when running in higher temperature or grip conditions as they make for greater stability and precision. The arms are available separately for the front or the rear and the rear set also includes the needed arm inserts made of the same material.

View the rear arm set here

February 18, 2019

Xray XT2 adjustable gearbox height options

Xray have introduced new option parts for the XT2 2WD stadium truck that allow to adjust the gearbox and rear suspension mount height of the vehicle. The range includes two 2mm carbon fibre gearbox height adjustment plates, with the T-shaped plated also raising the RF and RR suspension mounts, that can be used separately or stacked to achieve the desired driveshaft angle while the two optional -2mm and -4mm 3-gear front-mid motor plates allowing to lower the motor for an overall lower centre of gravity. By adjusting the gearbox height and lowering the chassis ride height, more forward traction, and less chassis roll in corners can be achieved. All parts are available separately, allowing to mix and match for the desired combination of gearbox, motor and chassis height. A full explanation of the accessible height options can be found here.

View the other new optionals here

February 18, 2019

T-Works MP10 graphite radio & upper plate

T-Works have introduced new carbon fire option parts for the Kyosho Inferno MP10 buggy in the form of a radio plate and an upper plate. Both are cut from high-quality carbon fibre and they replace the standard alloy items. While adding a factory touch the parts also offer slightly different flex characteristics compared to the standard alloy items, allowing to adjust overall chassis flex.

View the upper plate here