Red RC » P Off Road

October 18, 2018

Klinik RC 1/10 off-road & on-road cooling systems

Klinik RC have introduced a new cooling system for 540-size brushless motor and the use with most 1/10th scale buggies and touring cars. The design forces air through the motor instead of letting it flow around the can for a significant drop in operation temperatures. The cooler is constructed from durable material and it is available in three different design: a 90 degree variant for front motor buggies such as the Schumacher KC and most touring cars as well as an inline version for 4WD shaft buggies such as the Team Associated B64, Yokomo YZ4, Tekno EB410, Kyosho ZX6 and Xray XB4. Last but not last is the 45 degree variant for most mid motor buggies such as the B6.1, TLR 22 4.0, Yokomo YZ2, Xray XB2 and Schumacher KC/KD. The shrouds are completely customisable for a clean fit and maximum efficiency and they are paintable to match any recommendation. The kits include the 0.030” thermoformed shroud, four grade 5 billet titanium 3x15mm screws as well as a fan guard and – optionally – a Maclan or WTF HV 30mm fan.

View more images here

October 17, 2018

Muchmore Fleta M8 V2 brushless speed controller

Muchmore have introduced their new 180A-rated Fleta M8 V2 brushless speed controller for 1/8th scale applications. Usable with up to 6S LiPo input the ESC supports 2-pole, 4-pole and 6-pole motors, it features a 6V/7.2V programmable 8A BEC system and it measures 50x47x37mm while weighing in at 156g. The sensored speed also utilises a built-in on/off switch and an integrated programming port.

View a list of the specifications here

October 17, 2018

Tamiya Dynahead 6×6 G6-01TR truck

Coming soon from Tamiya is the Dynahead 6×6 G6-01TR 6-wheeler off-road trail truck. Based on the popular G6-01 chassis the TR version features portal hub reduction axles that up the final drive ratio to 37.35:1 for improving climbing performance, 15mm greater ground clearance and cool looks. The martially looking body shell was designed by Takayuki Yamazaki of PDC Design-works and the truck comes with 5-spoke wheels and V-tread block tyres for astonishing looks. The 453mm long truck is 4WS capable using a capable transmitter and optional rear axle parts. Included with the kit comes a 540-size brushless motor and the kit is set for a release this Winter.

Source: Tamiya [tamiya.com]

October 17, 2018

JConcepts 1979 Ford F-250 SCT body shell

Coming from JConcepts is their new 1979 Ford F-250 SCT body shell for 1/10th scale short course trucks. Built as they were in the good ole days, JConcepts has brought an essence of the 1979 truck together with the latest offerings in competitive Short Course Racing. With detailed 70’s styling, the grill, fender and authentic 70’s cab styling screams retro. JConcepts left no detail untouched bringing this theme to the SCT crowd and most notably the rear roll bars and front to back horizontal body lines that give the “79” unmatched SCT realism. The body fits the Slash, Slash 4×4 and other similar trucks and it comes including window masks and detailed 1979 Ford F-250 decal sheet.

View more images here

October 15, 2018

Hobbywing V10 G3 titanium-bonded rotors

Hobbywing have introduced two new titanium-bonded rotors for the V10 G3 series of brushless motors. The characteristic of the rotors will provide a smoother pickup acceleration without sacrificing top speed. This will help to tune motors especially to lower grip asphalt and carpet conditions as it aids car control out of tight corners. Available variants are a 5-12.5 and 5-12.3 that come individually marked for easy identification.

View the 5-12.3 rotor rotor here

October 15, 2018

Kyosho RB7 lightweight body shell

Coming from Kyosho and made for the Ultimate RB7 2WD buggy is a new lightweight body shell. Offering the same design as the standard kit shell, the lightweight variant is pulled from 0.6mm thin high-quality polycarbonate, making it 8g lighter than standard. Using the body will lower the overall centre of gravity which comes in handy especially on high grip surfaces where more crisp cornering can be achieved.

Source: Kyosho [kyoshoamerica.com]

October 12, 2018

Xray XB4 2019 1/10th 4WD buggy kit

Xray have introduced the 2019 variant of their IFMAR World Championship winning XB4 1/10th 4WD buggy platform. The buggy underwent a couple of updates especially in the rear suspension and drivetrain department to further improve drivability and durability. New for 2019 are the multifunction rear uprights that help to generate more traction and increase stability while new longer rear driveshafts with 2.5mm pins ensure smoother operation. The rear wheel axles now feature safety collars and Xray’s unique multi-position driveshafts length adjustment in order to fine-tune traction and side bite available for various track conditions. Also new are longer rear camber links that help to access the new roll centre settings the rear hubs offer while larger rear hub ball bearings increase durability. Next up are updated rear suspension arms that were redesigned to accommodate the multi-adjustable rear hubs while new, longer rear arm pivot pins match with the new geometry. In the drivetrain department the 2019 variant sports new diff outdrives that match with the 2.5mm drive pins for smoother operation. All-new bevel drive gears machined from special gear steel material reduce the weight and significantly improves reliability while the central shaft universal joints were redesigned to accommodate the new steel pinion gears. Last but not least comes a new graphite reinforcement plate between the servo saver for increased traction and improved cornering speed, a newly-shaped body makes the car more stable and improves the rotation in corners and the included new rear wheels sport a deeper recess for the wheel nuts. The kit is available from now on.

View a list of the new key features here

October 12, 2018

T-Works MP9E lightweight bearing kit

T-Works have introduced their new lightweight bearing kit for the Kyosho MP9E 1/8th electric buggy. The set includes 14 8x14mm bearings and 14 bearings inserts that, in combination, replace the original – larger – drivetrain bearings for smaller and thus lighter ones, scrubbing both overall weight and unsprung masses. The precision bearing inserts make for a reliable bearing seat and the included ball races are rubber-sealed for durability.

Source: T-Works [rc-tworks.com]