Red RC » P Off Road

July 4, 2018

Schelle introduce new B6.1 & YZ4 SF option parts

Coming from Schelle Racing Innovations are several new option parts for the Team Associated B6.1 and T6.1 as well as Yokomo’s YZ4 SF wheeler. Starting with the AE-related options, first up are Midnight Graphic chassis skins for the B6.1 buggy and T6.1 truck. Printed with a replacement tail skid and new split line, these protectors allow for easy access to the gearbox screws for repairs. Made in the USA on premium material, the new for 2018 graphic is sure to please. Next up is a 55-piece set of Grade 5 titanium screws for the T6.1. Scrubbing about 15 grams of weight the fasteners come pre-bagged and grouped by length for easy installation. Last but not last comes the Nova slipper assembly for the Yokomo YZ4 SF 4WD buggy. Shaving approximately ten grams of weight and being about 40 smaller in diameter the compact clutch will improve acceleration while delivering a smooth power delivery. The kit comes with a 81T spur gear and it is a drop fit with nothing more to buy.

View the other new parts here

July 3, 2018

7075.it Kill Bill shock absorber & diff vacuum pump

Building on the success of 7075.it’s Air Killer vacuum pump comes their new Kill Bill variant that adds to the existing range. Kill Bill was developed to sport a more appealing design and more compact dimensions for easier storage and transportation. The device was developed to remove unwanted air bubbles in shock absorbers and differentials and it is available for both short on-road and long off-road shock absorbers. The inserts sport five holes with the outer ones being marked and used for the shock absorbers while the centre holes takes a single gear differential. All parts come with a black surface coating and they sport white graphics for cool looks.

View more images here

July 3, 2018

Brilliant RC clutch gap shims

Brilliant RC have introduced their new 5x10mm and 5x7mm clutch gap shims. They are available in one convenient package with the 5x7mm shims coming in 0.1mm and 0.25mm thickness while the 5x10mm shims are included in 0.1mm and 0.3mm thickness. The set includes a total of 20 pieces and it is available now.

Source: Brilliant RC [brilliant-rc.com]

July 3, 2018

JQRacing Black Edition low rear shock tower

Coming from JQRacing is a new low rear shock tower for the Black Edition buggy. The shock stay sports lower shock mounting holes which reduces up travel slightly while making it easier to achieve the correct down travel. Drivers can screw the shock end on all the way, which adds safety. For smooth tracks, owners can also try adding one additional shock O-ring on the shock shaft, to reduce up travel further and the correct shock length to run is 120-121mm with this tower. As for the upper links, the stock middle hole is the same as the lowest hole on this tower. This means that there is one higher row on the new low tower. This can be good to run in high grip or bumpy conditions, where team drivers raise the hub with the middle insert.

Source: JQRacing [jqracing.com]

July 3, 2018

Kyosho Inferno MP9e Evo 1/8th E-Buggy kit

Kyosho Europe have released first images of their forthcoming Inferno MP9e Evo 1/8th electric buggy kit. The vehicle builds on the successful, 8-times World Championship-winning MP9 and MP9e platform but features a redesigned chassis layout with a very forward-moved weight bias as components such as the steering servo, radio box and speed controller are located towards the front axle while the motor is now in a mid-ship position. The highly regarded flat control and aerial posture of the previous model has been maintained while a forward weight shift has improved balance for optimised handling. In addition, subtle changes to the battery mount create a lower centre of gravity that combines with the race-tested body design of the MP9e Evo to deliver superior cornering, traction, and rough surface performance required of a racing buggy to perform successfully at the highest level. The kit features the front and rear suspension and drive systems from the latest Inferno MP9 TKI4 10th Anniversary Special Edition and the layout of the A7075T6 hard anodised aluminium chassis fas been specifically designed for the MP9e Evo to optimise weight distribution for electric power performance and a lower centre of gravity.

Continue reading here

July 3, 2018

Axial SCX10 2-speed gear set

Coming from Axial and made for the SCX10 II is a 2-speed gear set. The kit allows to upgrade the 31439 SCX10 transmission into a Hi/Lo gearbox. Gears used include a 18T machined gear, 26T/28T high speed gear set, and 28T/36T 2-speed shift gears. Also part of the conversion are all needed transmission internals, shifter forks and a mini servo saver, springs and a linkage set.

Source: Axial [axialracing.com]

July 2, 2018

T-Works MP9 metal diff internals

T-Works have introduced a set of specially coated metal gear internals for the MP9 TKI4 and TKI3 differentials. Each set contains six gears as well as pins and shims and using the parts will reduce overall wear while offering a smoother diff action thanks to the gear’s slick surface coating. One set contains parts for one differential meaning it need three sets to equip a full kit.

Source: T-Works [rc-tworks.com]

June 29, 2018

Kyosho tease updated MP9 E-buggy

Kyosho have released a first official teaser image of their forthcoming new Inferno MP9-based 1/8th electric buggy kit. Currently in use at this week’s 2018 Alabama Manufacturer Shootout race in Cullman, Alabama, in the hands of Jared Tebo, the buggy is expected be fully unveiled next week. While sporting a new radical body shell design with a rear shark fin, the buggy is also expected to feature a totally new weight distribution. We bring you more details on the kit as they become available.

Source: Kyosho [kyosho.com]