Red RC » P Off Road

May 1, 2018

Team Associated B64 series FT steering parts

Coming from Team Associated and made for the B64 series of 4WD buggies are new Factory Team steering parts. First up is the V2 aluminium steering rack as it was used by the factory team at the 2017 IFMAR World Championships. Made of 7075 aluminium, this version 2 rack has optimised Ackermann and steering rates for a more consistent steering feel through the entire corner. The black anodised items fits the B64 Team, B64D Team, and RC10B64 Club Racer and it was designed for the use with the #92034 B64 WC steering arms, #92006 adjustable bellcrank input arm, and a 20mm servo horn.

Continue reading here

April 30, 2018

Raw Speed Incisor & RugBurn 1/10th buggy tyres

Raw Speed have introduced their all-new Incisor and RugBurn carpet tyres for 1/10th 2WD buggies. These specifically designed tyres utilise low-profile carcasses for an overall lower centre of gravity, a proper geometry and a very responsive performance. The Incisor is a narrow 2WD front tyre while the RugBurn is usable for both 2WD and 4WD rides. Both will be hitting stores very soon.

View the RugBurn tyre here

April 30, 2018

Imbue D817 V2 carbon fibre shock towers

Imbue Motorsports have introduced their take on shock towers for HB Racing’s D817 V2. Offered in 4mm carbon fibre, these towers were designed to offer exceptional flex characteristics, providing increased grip and surface handling, as well a providing in-between shock mounting locations for finer adjustment, making them ideal for loose and rough tracks.

Source: Imbue Motorsports [imbuemotorsports.com]

April 30, 2018

Schelle B64 short wheelbase arms & B6.1 Ti screws

Schelle have introduced new optional parts for the Team Associated B64 and B6.1 in the form of short B64 rear arms and a titanium upper screw kit for the B6.1. Starting with the rear arms, these are already part of Schelle short wheelbase kit for the B64 with the modified wishbones offering a 2mm shorter wheelbase which is a popular mod for racing on lower traction surfaces as the reduced wheelbase will generate greater rear traction. The arms are available as standard or hard composite items. Coming soon is also a 55-piece Grade 5 titanium screw kit for the Team Associated B6.1 and B6.1D. Saving 15g in the upper regions of the buggy, the set will not only reduce overall weight but also lower the overall centre of gravity which can be beneficial especially in high-bite racing conditions. The set includes 12mm wing mount hardware with optional 20mm screws being available separately.

View the hard compound short wheelbase arms here

April 28, 2018

Trinity Punisher Spec class brushless motors

Coming soon from Trinity is the new Punisher Spec class sensored brushless motors. Designed with racers and track owners in mind, the Spec class stock motor offers true zero point, yet infinite timing adjustment, an updated sensor board design as well as an open bearing on the sensor end for easy cleaning and oiling. Lower resistance solder tabs and maximised can cooling vents, a newly designed low resistance stator and a 12.5mm high torque rotor round out the package. The motor is available soon in 13.5T and 17.5T variants.

View a list of the features and another image here

April 27, 2018

SWorkz S35 series FF & FR brass lower arm mounts

MW RC Cars have introduced new SWorkz front-front and rear-front lower arm mounts made from brass and fitting the S35 series of vehicles. Both weigh in at 25g each, they come laser-engraved for easy identification and the suspension hangers help to fine-tune the weight distribution of kits such as the S35-3, S35-3E, S35-T, S35-TE and S35-GT/GTE.

View more images here

April 27, 2018

Futaba BLS373SV large scale servo

German Futaba distributor Ripmax has introduced the new BLS373SV high-torque servo for large scale applications. The high-voltage compatible device supports the T7PX HighSpeed SR mode, it is S.Bus and S.Bus2 compatible and programmable using Futaba’s CIU-2/3 USB adapters. It features stainless steel top and output gears for strength, four ball bearings and Cobalt-Samarium motor magnets for precision and best possible performance. At 7.4V input the servo is able of pulling up to 37kg-cm of torque at a speed of down to 0.11s.

Source: Ripmax [ripmax.de]

April 27, 2018

Kyosho Inferno Neo 3.0 1/8th nitro RTR buggy

Coming soon on Kyosho’s popular Inferno 1/8th buggy platform is the Inferno Neo 3.0 ReadySet RTR nitro buggy. The vehicle makes use of the Championship winning MP7.5, comes factory-assembled and features performance parts such as front universal driveshafts, big bore shock absorbers, fluid-filled and tuneable front, centre and rear differentials as well as sealed receiver and receiver battery boxes. The buggy is powered by a KE21SP recoil starter nitro engine for ease of use a lots of power while the KC cross tyres ensure traction and stability on a variety of surfaces. The kit is rounded out by a pre-cut body shell in two colour choices and included with the RTR buggy also comes a Synchro KT-231P+ 2.4GHz transmitter. The buggy will hit stores in May.

View more images here