Red RC » P Off Road

December 18, 2017

Mugen reveal more MBX8 details

Following a first series of images, Mugen have revealed more details of the new MBX8 1/8th nitro buggy kit. The follow-up model of the ultra-successful MBX7 will feature new front and rear suspension mounts as well as updated front and rear gearboxes that allow to extract the gear differentials without detaching the suspension arms. The latter are of an updated design and made from a more resistant composite material. They are also box-shaped and include arm stiffeners to reduce flex and further increase durability. Optional carbon fibre plates will further enhance the ability to adjust their overall flex.

Continue reading here

December 18, 2017

VP-Pro VP-601 pre-mounted 1/10th MT tyre

Coming from VP-Pro is their new VP-601 pre-mounted 1/10th monster truck tyre. Of a new rubber compound the tyre combines grip and durability with the on-road tread making the tyre best used on sealed surfaces such as asphalt and concrete but also hard-packed clay. The tyre sports a 123mm diameter, 68mm width and it comes on 12mm hex Y-spoke rims.

Source: VP-Pro [vp-racing.com]

December 15, 2017

Serpent SDX4 improved carbon shock towers

Coming from Serpent and made for the SDX4 1/10th 4WD off-road buggy are improved carbon fibre shock towers. The V2 towers offer an optimised geometry for fine-tuned droop and up travel settings as well as an additional shock angle hole, and optimised camber link settings that are more spaced for greater durability. The shock towers are available separately from now on.

View more images here

December 15, 2017

LRP Competition Car Line 2018 LiHV batteries

LRP have introduced their 2018 Competition Car Line series of LiHV battery packs. All are made using the new Graphene-2 high-voltage 120C/60C cells for improved power output, a lower weight and improved cell life when charged to the standard 4.2V cut-off voltage. The hardcase packs utilise 5mm bullet-type connectors and they are available in several configurations including the 8000mAh TC Stock Spec, 6400mAh TC LCG Stock Spec and 6000mAh 112.5mm long Mid Shorty pack. Also new are the 5800mAh Stock Spec Shorty, the 4600mAh 25.1mm Light Shorty Stock Spec and 4200mAh 22.5mm Real Shorty batteryies. The range is rounded out by the 8000mAh 1/12th Ultra LCG 1S pack and the 6200mAh 1/12th Ultra LCG Stock Spec battery.

Source: LRP [lrp.cc]

December 15, 2017

VP-Pro 1/8th buggy aluminium setup wheels

VP-Pro have introduced a new aluminium setup wheel set for 1/8th off-road buggies and GT vehicles. They are precision machined from high-quality alloy material, come with a black surface coating, white lettering and silver edge details for a professional look. The wheels will make camber, toe and droop adjustments more precise and they come in sets of four.

Source: VP-Pro [vp-racing.com]

December 15, 2017

Schelle B64 light front CVA bones & universal 3+1 pistons

Coming from Schelle are the new 76mm light CVA bones for the Team Associated and universal 3+1 shock pistons for a range of 1/10th off-road vehicles. Starting with the front CVA bones, 2-piece bones utilise a lightweight aluminium pin drive shaft mated to proven MIP steel CVA yokes. The bones can handle the power of both 13.5 and 17.5 motors but are not recommended for modified racing. They save about 3.5g of rotating weight, and fit the B64 and B64D.

Continue reading here

December 14, 2017

Axial SCX10 II Trail Honcho RTR truck

Based off of the SCX10 II trail truck chassis is Axial’s new Trail Honcho 4WD RTR truck. The factory assembled vehicle comes equipped with the AX10 transmission, single-piece AR44 axles, Method Hole wheels, Falken Wildpeak M/T tyres and a set of four LED lights. A 35T brushed motor is part of the package as is the AE-5L speed controller, the water resistant TSX45 servo and a 3-receiver and 2-channel TTX200 SLT radio. The set is rounded out by a pick-up body shell with rear roll cage.

View more images here

December 14, 2017

Exotek roll out new EB410 optionals

Coming from Exotek and made for the Tekno RC EB410 buggy are a couple of new optional parts. First up is a machined heavy duty 81T spur gear and mounting plate set for the stock centre gear diff. The much stronger machined delrin spur gear reduces the chances of stripped gears and includes the machined 7075 mounting plate with hardware. The 2-piece design also makes for quick and easy spur gear changes as owners do not have to open the gear diff and remove the outdrive, or refill the oils. In addition the alloy mounting plate provides cooling of the diff fluid for more consistent diff action. A 81t spur gear is included and the alloy mount also works with Exotek’s optional 72T spur.

Continue reading here