Red RC » P Off Road

November 16, 2017

175RC 1/10th off-road titanium lower arm stud kit

175RC have introduced the billet machine grade 5 titanium lower arm stud kit for 1/10th 2WD buggies or trucks. This option is not only super light but also increases strength in the rear arms because the driver is not repeatedly threading a screw in and out when removing the shocks. The set includes two grade 5 titanium studs with .050 drive, a pre-thread screw/depth setter and two aluminium flanges locknuts that are available in seven different colours and it fits kits such as the B6, B64, 22 4.0, YZ-2, RB6.6 and XB2.

View another image here

November 15, 2017

Traxxas ProGraphix bodies & hardened steel pinions

Traxxas have introduced a range of new ProGraphix body shells and 32-pitch hardened steel pinion gears. Starting with the bodies, the ProGraphix series lids come pre-painted, trimmed and with applied decals so they are ready to go in no time. Available is the colourful Hawaiian design for the Bandit buggy, Stampede monster, Rustler stadium, and Slash short course truck. Also coming are the Mike Jenkins Edition Nitro Slash and a new Ford Fiesta ST body. In addition to the bodies comes a new line of 32-pitch pinion gears for the Slash and Stampede 4×4 models as well as the brushed versions of the E-Revo and E-Maxx. The gears are available in sizes from 12T to 20T, they are made from high-quality steel and sport engraved size markings for easy recognition.

View the other new parts here

November 15, 2017

Lunsford YZ-2 DTM titanium screw sets

Coming for Yokomo’s World Championship winning YZ-2 platform are two new titanium screw kits from Lunsford. Made specifically for the DTM version, two sets are available. The 70-pieces top kit includes all needed 3mm hardware for the upper side of the vehicle while the 26-piece bottom side kit includes a total of 26 fasteners for the lower part of the buggy. All are made from US-made Grade 5 titanium for a low weight, high stability and exceptional corrosion resistance.

View the bottom screw set here

November 15, 2017

Samix CFX-W aluminium servo horn

Samix have introduced an aluminium servo arm for the MST CFX-W trial truck. The item is machined from high-quality aluminium for improved stability while the clamping design adds security in case the servo screw comes loose during a ride. The arm is available in 23T and 25T configuration, making it usable with Futaba, KO, Sanwa and Savöx servos, and it is available in black, gunmetal, silver or green anodising.

View another image here

November 14, 2017

RC Speed Secrets EB410 Beast Mode bundles

New from RC Speed Secrets come the Beast Mode bundles for the Tenno EB410 1/10th scale 4WD buggy. The combo sets include RCSS’ most popular racing and performance level products. With the Build-Your-Own feature, it allows racers to select the performance Next Level Ceramic Bearing Gearbox Set plus a 30mm Wild Turbo motor fan and a complete set of RCSS Deep Socket Titanium upper screw set; the latter being available in bling or stealth black finish.

View the stealth black bundle here

November 14, 2017

MCD Racing RR5 engine heat sink

MCD from Turkey have introduced a new engine heat sink for the RR5 buggy and comparable vehicles. Machined from a single block of 7075 aluminium, the specially shaped heatsink will reduce the temperature at the spark plug by about 10°C, even when run in high ambient temperatures of over 35°C, which results in improved engine performance. The updated heatsink was developed exclusively for the use with NGK CRE8 and CR8EIX spark plugs. In order to protect the cooling head MCD have introduced a composite protector that works with long and short plugs as well as the Barracuda pipe air flow.

View another image here

November 14, 2017

Team Magic B8ER 6S 1/8th electric RTR buggy

HRC Distribution have introduced the 6S LiPo-compatible version of their popular B8ER 1/8th electric off-road buggy. It is based on the race-proven B8RS competition buggy and features a waterproof HARD brushless system, a powerful 16kg-cm metal gear servo and it is equipped with aluminium shock towers, high-quality CVD driveshafts as well as HRC longline high-traction tyres. With its 150A-rated speed controller, 2250kV brushless motor and and optional 6S LiPo battery the buggy is capable of a top speed of up to 110km/h.

View another image here

November 14, 2017

Schelle B64 Extreme shock tower set

Schelle Racing Innovations have introduced their new Extreme shock towers for the Team Associated B64 buggy. Machined from 4.0mm carbon fibre for stiffness and durability the front and rear tower have the unnecessary outer holes removed for less leverage to break while the front tower sports optional wing mount holes. The front wing is a great addition in high traction when using the less-agressive kit B64 body. Schelle’s testing has found that the JConcepts F2 body does not require a front wing, but the kit body will definitely benefit from it. In the rear, racers get a more durable tower, with new upper link options that improve handling. The kit outer row of holes are shifted 2.5mm towards the centreline, which lengthens the link and improves cornering balance. The inboard row of holes are shifted 2mm and only marked with a drill dimple, as they will be rarely used except for extreme traction conditions. The towers are usable on all B64 kits with standard 27.5 rear shock bodies, they come separately or as complete set with the optional 3-D-printed front wing mount being available separately.

View the other new parts here