Red RC » P Off Road

August 25, 2017

Carisma Scale Adventure SCA-1E Coyote RTR truck

Carisma have introduced the all-new line of Scale Adventure RTR kits with the first one being the 50’s pickup truck inspired SCA-1E Coyote truck. It features a solid axle 4-link suspension, a sturdy 4WD drivetrain, detailed bumpers with winch and tow hitch and it is powered by a 35T brushed motor and waterproof crawler ESC. The 1/10th scale vehicle will initially only be available as an RTR, with everything needed for operation included, such as an USB charger. A self-build kit version will follow, as well as other models based on the SCA-1E chassis and running gear. The truck will hit stores this Fall with other variants, including officially licensed products, coming at a later date.

View the features and more images here

August 25, 2017

Serpent Cobra SRX8 Evo – Coming soon

Serpent have announced the forthcoming release of the Cobra SRX8 Evo 1/8th nitro off-road buggy. Not much is known yet but subtle changes in the chassis, drivetrain and suspension areas be awaited. Full details and images will become available next week.

Source: Serpent [serpent.com]

August 25, 2017

Traxxas Fiesta ST Rally 1/10th scale RTR kit

Traxxas’ poplar 1/10th Rally ready-to-run car received a small update with the introduction of the Fiesta ST body shell. The car rocks a full-time 4WD low centre of gravity chassis with heavy duty gear differentials, oil-filled Ultra Shocks, long travel suspension and a powerful Titan 550-size brushed motor. Also included in the package are waterproof electronics for go-everywhere capabilities, as well as a 2.4GHz radio system for glitch-free operation. In the front the Fiesta ST body is mounted to the new high approach front bumper that gives increased ground clearance while grippy all terrain tyres help to take all sorts of tracks, from tarmac racing to backyard bashing. The kit is rounded out by an officially licensed Ford Fiesta ST body shell that sports a flashy paint job and a durable moulded rear wing.

View the features and more images here

August 24, 2017

Tekin RS Pro Black Edition ESC & Spec-R BL motors

Tekin have introduced their new RS Pro Black Edition brushless speed controller and Spec-R motors. Starting with the ESC, the RS Pro Black Edition was developed with ultra low internal resistance in mind to boost the performance of 1S and 2S-powered stock motors. This was achieved by utilising both hardware and software advances in combination with the Ultra Low Resistance ULR circuit design and ULR flex wires. The controller measures 24.5x33x17.25mm, it weighs in at 35g and it has no motor limit, however Tekin recommends their RSX controller for all modified applications as these setups tend to run at higher temperatures and so the billet housing and fan shroud on the RSX will provide more sufficient cooling.

Continue reading here

August 24, 2017

JConcepts 1/8th & 1/10th tyre balancer

Coming from JConcepts is their new tyre balancer suitable for 1/8th and 1/10th scale tyre and wheel combinations. The collapsible design rests in a lay-down configuration but pivots to a 90 degree stance and locks when in usable condition. The centre point of any balancer are the bearings, the free spinning action rests inside the hub design. The interchangeable thumb nuts for 1/10th and 1/8th wheel versatility are located on the main axle which can be moved from its home base position to its critical balancing position with ease. The upright is built in aluminium material, anodised blue, etched with instructions and chamfered for that extra lustrous look. The base of the item is built to protect, position and maintain a small footprint at all times. The base has four stand-off legs to hold a steady structure while a thumb screw secures the upright in either the up or down position. The all-aluminium and steel design comes set in a storage box for protection and travel convenience.

View more images here

August 24, 2017

Raceform Lazer differential rebuild pit

Raceform have introduced their new Lazer differential rebuild pit. Precisely machined from Plexiglas for a low weight and good durability the tool includes machined holes to hold the gear differentials of 1/8th and 1/10th vehicles during building, maintenance and setup. Tray compartments with milled slots make for easy pick-up of shims and small parts while the included inserts allow to reduce the diameter of the diff holding holes when working on smaller 1/10th diffs. The underside features an anti-slip padding and the pit is available in eight different colours to fit any colour scheme.

View more images here

August 24, 2017

Losi DBXL-E aluminium top plate & chassis braces

Losi have introduced new aluminium option parts for the DBXL-E kit in the form of a front top plate as well as front and rear chassis braces. Available separately and coming machined from high-quality alloy material the parts are specific to the DBXL-E and its chassis layout. The black anodised items feature machined silver edge details and they add strength and durability while offering improved visual appearance compared to the stock parts.

View the chassis braces here

August 24, 2017

T-Works B6 & B64-series carbon fibre shock towers

T-Works have introduced a range of carbon fibre replacement shock towers for the Team Associated B6 and B64 series of 1/10th scale buggies. Available are front towers for the B6 and B6D suspension, a B6/B6D rear shock tower as well as front and rear shock stays for the B64/B64D. All are made using high-quality graphite material and it is understood that they match the respective stock geometries.

View the other shock towers here