Red RC » P Off Road

August 24, 2017

Speedzone introduce new modified & stock BL motors

Speedzone have introduced their latest brushless motor based on months of testing and previous customer feedback. This latest motor is the most powerful, efficient, tunable and lightweight motor ever offered by Speedzone. The motor’s can was built to allow maximum air flow, keeping temperature cool and the motor efficient. The stator was designed to produce the very best resistance while being as light as possible without sacrificing performance and power. In addition, the sensor board was built with strict tolerances which now translates to evenly distributed sensor board numbers. A variety of spec and modified turns are available and they are bench tested to ensure sensor, stator and ball bearings are all functioning to a strict quality control. Optional spec and modified rotors will be available for tuning to various track surfaces and conditions.

View the features and more images here

August 23, 2017

Samix CFX-series brass spring retainers

Coming from Samix and made for the CFX-W and CFX trucks are brass spring retainers. Machined from high-quality material and coming in a black/golden 2-tone finish, the spring cups weigh in at 15g for all four which adds valuable weight to one of the lowest areas of the car, improving climbing performance and looks. Additionally the rigid material makes for a more secure spring fitment compared to the standard plastic parts. The spring retainers come in sets of four and they are available now.

View more images here

August 23, 2017

JConcepts Aero & Aero S-type rear wing centre dividers

JConcepts have introduced their new Aero and Aero S-type rear wing centre dividers. The dividers are simple, yet effective and together with wings like the Aero, can provide additional stability and performance needed. Each centre divider has built-in adjustments that allow the driver to alter the height in order to match conditions at hand. The parts are light-weight and feature the JConcepts leading edge wing chamfer which match existing side-dams. Special consideration has been made to line-up with the Aero wing including a hard bevel on the base for better fitment and more air channeling. The standard Aero divider fits JConcepts’ #0168, #0169, #0178, and #0179 wings while the S-type suits the #0173 and #0181 wings. The dividers are available separately with each including two pieces.

View more images here

August 23, 2017

Yeah Racing 35mm & 25mm cleaning brushes

Yeah Racing have introduced their new 35mm and 25mm cleaning brushes. Made using soft yet durable bristles the brushes are ideal for all cleaning tasks and the ergonomically shaped rubber handles make cleaning of all on-road and off-road vehicles easy. The brushes are available separately form now on.

View the 25mm brush here

August 23, 2017

Hudy 20-30mm adjustable ride height gauge

Following the 14-20mm adjustable ride height gauge, Hudy now also have a 20-30mm variant available. Utilising the same compact design, the gauge is suitable for 1/10th and 1/8th scale off-road vehicles and it is very easy to use thanks to the laser-etched height markings and the screw-type design that allows to adjust the required ground clearance by unscrewing the upper cap and aligning the markings of the required ride height. The gauge is made of high-quality aluminium and it comes black anodised for wear and looks.

Source: Hudy [hudy.net]

August 23, 2017

Castle Creations Mamba X E-Buggy Racing Editions

Coming from Castle Creations are two new Racing Editions controller and motor combos for 1/8th E-buggies. Both make use of the Mamba X sensored speed controller that features Castle Creations’s latest firmware for smooth yet powerful throttle and brake control, data logging capacities including motor and speedo temperature and it features a strong 5.25V-8.0V 8A BEC system. A waterproof aluminium housing makes for go-everywhere capabilities and it measures a compact 54.4×35.2×30.0mm while weighing in at 101g. Included in the set are either the ROAR Mod approved 1512-1800kv or ROAR Mod pending 1515-2200kv brushless 4-pole/12-slot motors.

View the specifications here

August 23, 2017

Reedy Zappers 15.2V 4S 6400mAh LiHV hardcase battery

Reedy’s Zappers Lithium batteries are now also available in a 4S LiHV version for 1/8th E-buggies and trucks. Originally referring to Reedy’s proprietary NiMH voltage enhancement technology, Zappers describe Reedy’s high-voltage LiPo battery chemistry. A 15.2V nominal voltage means that with a suitable charger, the battery can be safely charged to 17.4V total or 4.35V per cell. Even when the typical 16.8V or 4.2V/cell charging limit is enforced, the battery still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. A high-quality, durable hardcase helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. A charge lead, balance lead, and male 5mm ESC connectors are included.

Source: Team Associated [teamassociated.com]

August 22, 2017

Kyosho tease two new vintage re-release kits

Kyosho fans rejoice! The Japanese company has released two teaser videos to promote the forthcoming release of two vintage kits one of which seems to be the mighty Javelin – one of the most expensive vintage kits to buy these days. The first video pretty much tells it all as Kyosho aficionados will spot the buggy’s iconic cage while the second clip teases the release of a monster truck-ish type of vehicle. We bring you more information on the two as they surface.

View a screen grab of the truck teasing video here