Red RC » P Off Road

October 19, 2017

ECX Barrage 1/24 4WD scale RTR rock crawler

Horizon Hobby have introduced the new ECX Barrage 4WD 1/24 scale rock crawler. The palm-sized vehicle features incredible scale realism, officially licensed Falken Wildpeak MT tyres, a rear “truggy” cage with spare tyre and LED lights. It is perfect for messy desks and messy bedrooms as well as crawling through gardens, mud, as well as your neighbourhood creek and can clear marble-sized rocks easily. A true 4-link suspension handles the suspension control and a stamped, black-coated aluminium chassis makes for a strong and stiff backbone. Included in the package, that is available in orange or blue body colour, is also a 4.8V 220mAh NiMH battery pack and a one-step USB charger.

View the features and more images here

October 19, 2017

KO Propo VFS-FR2 Pro brushed motor speed controller

KO Propo have introduced their new VFS-FR2 Pro brushed motor speed controller. The compact device measures 32.6x20x9.4mm and it weighs in at 25.3g. Rated at 120A constant current and 1200A peak current the ESC is good even for low-turn modified motors and it is usable with 6.6V to 8.4V input. The controller comes with all-black wires, pre-installed with the Ultimate Booster 2, and including a 35V capacitor. With its adjustable drive frequency the overall throttle response can be adapted to a range of conditions, from low to high grip surfaces and it is adjustable using KO Propo’s VFS-FR Manager software.

View the features & specifications here

October 19, 2017

Kyosho MP9 series pre-glued brake pads

Coming from Kyosho and made for the MP9 series of 1/8th nitro off-road buggies is a pair of pre-glued brake pads. The special material of the brake linings and the unique glueing method will result in more consistent braking and less fading during a run. The pads come in pairs and they are usable for the current MP9 TKI4 and also older spec TKI3 and TKI2 buggies.

Source: Kyosho [kyosho.com]

October 19, 2017

MIP Pucks B6 series 17.5 Drive System 67mm

MIP have introduced the Pucks 17.5 Drive System 67mm for the Team Associated B6 series of buggies. It features an aluminium based drivetrain system which includes a 2-piece aluminium outdrive cup and aluminium outdrive hub, two Bi-metal bones, and the replaceable plastic orange wear Pucks that take the place of the inferior steel pins. This combination greatly increases the longevity of the drive train and most importantly decreases the drivetrain’s overall rotating mass by 50 percent. The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temperatures. The set includes all needed parts including the ball differential but except the diff gear and wheel axles. The kit is available for pre-order now and will be produced if 125 pre-orders are received until November 8th.

Source: MIP [miponline.com]

October 18, 2017

SWorkz S35E series centre chassis reinforcements

SWorkz have introduce two new chassis reinforcement braces for their S35E based vehicles. The braces attach to the lower chassis right between the front and rear chassis braces and they will reduce chassis pitch to protect the centre driveshaft while remaining chassis flex. Coming as lightweight aluminium or +20g brass variant, the braces will fit the S35E, S35-TE, Zeus and Apollo kits.

View more images here

October 18, 2017

RCSS B64 LCG Relocation shock towers & upper deck

Coming from RC Speed Secrets and made for the Team Associated B64 and B64D are the carbon fibre LCG Relocation shock towers and a carbon fibre front upper deck. Starting with the shock towers, RCSS relocated the holes to align the camber link above the hinge pin and added some extra LCG tuning hole options in the same position. The result is a car that tracks better while promoting sweeping turns versus more choppy turning. The towers also offer more tuning options for higher traction surfaces like carpet, turf, and high bite clay. Although in testing showed that it is best to run both front and rear LCG towers, Team Associated’s Spencer Rivkin just used the rear tower to take a 2nd overall at the recent International Offroad Carpet Championship.

Continue reading here

October 18, 2017

Arrma Granite & Fazon Voltage Mega SRS RTR trucks

Coming from Arrma are the all-new Granite and Fazon Mega SRS ready-to-run trucks. The 1/10th scale 2WD vehicles are based on a newly designed mid motor plastic monocoque chassis that was developed around a highly versatile battery compartment that allows to run the trucks with the new Arrma 18650 LiIon single cell batteries or your choice of standard 6-cell NiMH or 2S LiPo batteries. Using the company’s 3.7V LiIon cells reminds of using a toy as they are side-loaded into the battery compartment and using one, two or three pairs of batteries allows to double or triple the running time of the truck. Other features include a tough transmission with metal-geared differential, wide transmission gears as well as oil-filled shock absorbers and waterproof electronics. The sets are rounded off by pre-painted body shells, grippy dBoots tyres and a 2.4GHz radio system and a charger. Both the Granite monster and Fazon race truck are available in two different body colours and they will hit stores soon.

View more images here

October 17, 2017

JConcepts MBX7R Strike 3 buggy body shell

JConcepts have introduced their new Strike 3 body shell for the Mugen MBX7R buggy. The body samples elements from its famous relatives the Finnisher, Silencer and Striker but packs a slightly refined image. The base enhancements to the design come from the parallel to chassis side pods, that look traditional with 1/8th buggies of the past. A large rear-end winglet has been added to aid in the rear traction stability as well as stopping force. The offset of the race proven shell provides a compact fit for fuel tank, linkage and air filter assembly while the heavy channeling on the front windshield keeps the Strike 3 aligned at high-speed. Just behind the engine head, a sleek up-rising flows from the body like running water and a sharp rise in the rear wicker blocks flow to the rear tower and redirects to the rear wing area. The clear body set includes window templates and a decal sheet and it is a direct fit for the MBX7R.

View more images here