Red RC » P Off Road

October 13, 2017

Exotek titanium Puck bones & B64 81T spur gear

Exotek have introduced new titanium Puck bones for MIP bi-metal driveshaft systems as well as a heavy duty 81T POM spur gear for the B64 buggy. Starting with the driveshaft dog bones, they are available as 76mm front bones for the Team Associated B64 buggy and also as shorter 67mm bones for the TLR 22 4.0 and AE B6 67mm CVA/hub/axle sets. At half the weight of steel and twice the strength of aluminium the driveshaft dogbones increase durability and reduce wear and tear. The replacement parts for the MIP bi-metal bone puck sets are machined from polished and laser-etched Ti 6-4 titanium and they come as pairs and separately for the front and rear of the buggy.

Continue reading here

October 13, 2017

Team Associated Factory Team 4-shoe clutch gauge

Coming from Team Associated is the Factory Team 4-shoe clutch gauge. The tool was designed to detect worn-out clutch shoes that can negatively impact the performance of the clutch and cause an engine to intermittently flame out even when tuned properly. The “Go or No Go” style gauge is placed over the clutch shoes and rotated in the direction of the arrows, the smallest internal measurement profile of the gauge, 23.40mm, determines if the shoes are too worn – with new shoes, it will turn only slightly. If the shoes are smaller than the tool, the shoes need to be replaced for optimal performance. The tool works with a complete clutch assembly either installed or uninstalled on an engine. This eliminates the need for expensive measuring devices such as callipers or micrometers. The tool is made from hard-anodised aluminium and works on Team Associated 4-shoe clutch (stock B3.1 #81370) and Losi 4-shoe style clutches (steel and aluminium).

Source: Team Associated [teamassociated.com]

October 12, 2017

HRC Racing 14.8V 4S 5800mAh LiPo battery pack

Coming from HRC Distribution is the new HRC Racing 14.8V 4S 5800mAh LiPo battery pack. Build from high-quality 65C/110C cells the hardcase battery was designed for 1/8th off-road vehicles and it comes pre-soldered with a genuine Deans T-plug connector. The pack measures 140x46x48mm and weighs in at 480g making it usable for a wide range of buggies, truggies and monster trucks.

Source: HRC Distribution [hrcdistribution.com]

October 12, 2017

Xray XB8 series lightweight High Speed body shell

Coming from Xray and made for the XB8 nitro and XB8E E-buggy is the lightweight High Speed body shell. Made from high-quality Lexan material the body offers increased rotation and speed in corners all while creating less chassis roll and a more aggressive handling. The body comes clear, with a protective overspray film and pre-cut window masks.

Source: Xray [teamxray.com]

October 12, 2017

Prostar R/C 8ight 4.0 carbon nylon pills

Prostar R/C have introduced a set of carbon nylon pills for the TLR 8ight 4.0. They have been designed to replace the stock and often sloppy inserts which are the main issue why hinge pins are bending. Prostar have made them from a special carbon nylon material for durability and strength and the set includes eight 0 degree, four 0.5 degree and four 1.0 degree inserts all of which are of a tight fitting design.

Source: Prostar R/C [prostarrc.com]

October 12, 2017

Losi Rock Rey 1/10th 4WD rock racer kit

Coming from Losi is the Rock Rey 1/10th 4WD rock racer kit. The kit variant of the company’s popular Rock Rey comes standard with a handful of option parts, allowing racers to customise the vehicle how they want as they have the complete freedom to accessorise and hop up the vehicle to their liking. With a new roll cage that resembles full-scale rock racers and its new front-end geometry, the changes add the needed handling for rock racing while taking advantage of the Baja Rey platform’s rear-loading battery and bottom-loading motor. The kit includes aluminium rear upper links and upper rod track mounts, as well as adjustable camber links and turnbuckles for the steering. For U4 racing, Losi includes a diff locker for the centre differential. Also part of the package are 2.2″x5.8″ Maxxis Creepy Crawler LT tyres and clear body panels to create custom paint jobs.

View the features and more images here

October 11, 2017

Picco V1 .21 Team Robert Batlle Edition engine

Picco have introduced their new V1 Team Robert Batlle Edition .21 nitro off-road engine. Born to commemorate the victory of the 2017 EFRA 1/8th Buggy European Championship, the engine sports advanced features such as a DLC-treated crankshaft, and a rear ceramic bearing. The low centre of gravity cooling head features a different colour scheme and is a tribute to European Champion Robert Batlle, while the 5-port cylinder sports an updated exhaust timing to achieve more response in the low to mid RPM range. The engine package is rounded out by a 2099 performance exhaust kit that features a front pressure nozzle in order to optimise fuel consumption and tuning.

Source: Picco [teampicco.com]

October 11, 2017

Rusti Design chassis protector decals

French brand Rusti Design have introduced their new chassis protector decals. Sporting flashy Rusti Design graphics the pre-cut decals are available in eight different colour variants and for a huge range of brands and cars – including on-road, off-road and some vintage kits. Using the protractor skins will ensure a longer chassis plate life in abrasive track conditions and cooler looks when the car is upside down.

View the colour variants here