Red RC » P Off Road

October 18, 2017

RCSS B64 LCG Relocation shock towers & upper deck

Coming from RC Speed Secrets and made for the Team Associated B64 and B64D are the carbon fibre LCG Relocation shock towers and a carbon fibre front upper deck. Starting with the shock towers, RCSS relocated the holes to align the camber link above the hinge pin and added some extra LCG tuning hole options in the same position. The result is a car that tracks better while promoting sweeping turns versus more choppy turning. The towers also offer more tuning options for higher traction surfaces like carpet, turf, and high bite clay. Although in testing showed that it is best to run both front and rear LCG towers, Team Associated’s Spencer Rivkin just used the rear tower to take a 2nd overall at the recent International Offroad Carpet Championship.

Continue reading here

October 18, 2017

Arrma Granite & Fazon Voltage Mega SRS RTR trucks

Coming from Arrma are the all-new Granite and Fazon Mega SRS ready-to-run trucks. The 1/10th scale 2WD vehicles are based on a newly designed mid motor plastic monocoque chassis that was developed around a highly versatile battery compartment that allows to run the trucks with the new Arrma 18650 LiIon single cell batteries or your choice of standard 6-cell NiMH or 2S LiPo batteries. Using the company’s 3.7V LiIon cells reminds of using a toy as they are side-loaded into the battery compartment and using one, two or three pairs of batteries allows to double or triple the running time of the truck. Other features include a tough transmission with metal-geared differential, wide transmission gears as well as oil-filled shock absorbers and waterproof electronics. The sets are rounded off by pre-painted body shells, grippy dBoots tyres and a 2.4GHz radio system and a charger. Both the Granite monster and Fazon race truck are available in two different body colours and they will hit stores soon.

View more images here

October 17, 2017

JConcepts MBX7R Strike 3 buggy body shell

JConcepts have introduced their new Strike 3 body shell for the Mugen MBX7R buggy. The body samples elements from its famous relatives the Finnisher, Silencer and Striker but packs a slightly refined image. The base enhancements to the design come from the parallel to chassis side pods, that look traditional with 1/8th buggies of the past. A large rear-end winglet has been added to aid in the rear traction stability as well as stopping force. The offset of the race proven shell provides a compact fit for fuel tank, linkage and air filter assembly while the heavy channeling on the front windshield keeps the Strike 3 aligned at high-speed. Just behind the engine head, a sleek up-rising flows from the body like running water and a sharp rise in the rear wicker blocks flow to the rear tower and redirects to the rear wing area. The clear body set includes window templates and a decal sheet and it is a direct fit for the MBX7R.

View more images here

October 17, 2017

Muchmore Fleta M8.2 Competition 1/8th BL ESC

Muchmore have introduced the latest incarnation of their Fleta M8 brushless speed controller for 1/8th scale vehicles. The M8.2 features a machined aluminium case with Flow-Max technology for maximised cooling efficiency. The finely ripped heatsink is incorporated into the case for added cooling performance and an additional ultra high RPM cooling fan with aluminium guard further increases heat dissipation when using powerful motors or when running in high ambient temperatures. The M8.2 makes use of Muchmore’s RSS reversible switch system whose optional power switch allows to use the controller with power switch or, with the ESC being always on, switch-less. Also coming with the controller is a triple power capacitor that was designed to assist the latest LiPo technology and deliver a linear throttle feeling.

View the specifications and another image here

October 16, 2017

Xray XB4 2018 1/10th 4WD electric buggy kit

Xray have introduced the 2018 edition of their 2016/17 EOS winning XB4 1/10th 4WD buggy kit. The car, that also is reigning IFMAR World Champion, EFRA European as well as US Champion, received some subtle updates to better cope with the rigours of today’s ultra-competitive Modified racing. First up is a redesigned chassis that accommodates a new, lower motor mount to lower the overall centre of gravity. The corresponding centre bulkhead lowers the position of the centre drivetrain for higher corner speeds especially on high-bite surfaces while the updated side guards add to the all-new low CG setup. In the suspension compartment, improved lower bushings for the shock absorbers allow for smoother and more precise shock shaft movement. The 2018 kit is rounded out by updated front and rear differential crown gears whose greater precision leads to quieter operation and increased reliability.

View the full presentation of the XB4 2018 here.

Source: Xray [teamxray.com]

October 16, 2017

Rusti Design B6 series rear shock tower spacer

French brand Rusti Design has released a new shock tower spacer for the Team Associated B6 series of 2WD buggies. The 3-D-printed part allows to mount the rear shock tower in a more rearward position, such as found of the AE B5M buggy. The updated shock tower and rear wing position will improve the buggy’s balance and traction on lower grip surfaces, which was proved by Antoine Rosetti’s 3rd place at last weekend’s French Cup, and the conversion requires four M3x40mm button or socket head as well as two M3x25mm button head screws for completion. The spacer is usable on both the B6 and B6D buggy.

View more images here

October 16, 2017

Tekno RC release EB410 option parts

Available now from Tekno RC is a range of optional parts for the EB410 1/10th 4WD electric buggy. Made to replace the standard parts are items such as carbon fibre front and rear shock towers, including a -2mm rear variant, a carbon centre diff top plate and fan mount, carbon fibre battery strap, titanium-nitride coated shock shafts, a full range of shock springs as well as a complete front sway bar set, rear sway bars and also several wheel hexes made of composite plastic or aluminium.

View the other option parts here

October 16, 2017

VP-Pro aluminium 1/8th off-road wing buttons

VP-Pro have introduced a set of aluminium wing buttons for 1/8th off-road vehicles. They come machined from aluminium, sport a black anodised surface for looks and wear and additional machining creates a silver teardrop design to lower the button’s weight and add visual impact. The wing washers come in sets of two and they are usable for most screw-type wing mounts.

Source: VP-Pro [vp-racing.com]