Red RC » P Off Road

September 6, 2017

Kabuto Turbo-style glow plugs

SMJ have introduced new Turbo-style glow plugs in four different heat ratings for off-road and on-road engines. The P3 is an ultra hot off-road glow plug for low ambient temperatures that provides stable idling, making it ideal for all run-in tasks. Next up is the P4 super hot off-road plug for low ambient temperatures while the RP6 hot on-road and RP7 medium on-road plug are made for low temperatures and all-season weather respectively. The Japan-made plugs are available separately.

content

September 6, 2017

Exotek 22-4 2.0 aluminium front pivot mount

Exotek have introduced an aluminium front pivot mount for the TLR 22-4 2.0 1/10th 4WD off-road buggy. Machined from 7075 alloy and coming black anodised the part offers a heavy duty design and it prevents costly and time consuming DNFs from failures of the stock plastic pivot mount. The mount is machined out for lightness and it weighs in at only 17.6g. Included are two M3 set screws to lock down the hinge pins.

View more images here

September 6, 2017

VP-Pro VP-815 1/8th buggy tyre

Coming from VP-Pro is the new VP-815 1/8th buggy tyre. Packed with over 2000 pins the tyre was developed for the use on abrasive surfaces and in dusty, bumpy as well as wet or dry track conditions. The tyre is available separately including orange closed cell inserts and also pre-mounted on white or yellow disc wheels.

Source: VP-Pro [vp-racing.com]

September 5, 2017

Ultimate Racing M3S nitro off-road engine

Modelix Racing have introduced the new Ultimate Racing M3S nitro off-road engine. The O.S. made long-stroke power plant was developed to combine high torque with extreme power and a low fuel consumption, something that was achieved by using a redesigned carburettor that sports a new high speed needle holder for optimised mixture flow, better idling stability and increased mileage. Furthermore the new carburettor features a new uniball joint with two mounting screws for easier angle adjustment. Also new is an updated crankshaft with silicone filling and tungsten balancing while the DLC coating improves the lifespan of the crankshaft and crankshaft pin. Part of the new package is also a 3-port liner and piston assembly for smooth, linear yet high power supply and the updated CNC-machined and red anodised backplate made of 7075-T6 aluminium for reduced friction. Thanks to its design the backplate is now also easier to remove. The M3S engine is rounded out by high-quality Japanese-made ceramic bearings and 6.0mm and 6.5mm venturi inserts.

the specifications and another image here

September 4, 2017

RDRP XB4 aluminium caster block sets

Revolution Design Racing Products have introduced their new caster block sets for the Xray XB4 series of 1/10th scale 4WD buggies. An improvement over the original construction the hubs allow to easily adjust the camber link ball stud position and thus camber link length and roll centre by simply adding or removing shims. The multi-piece design was used on rear uprights before and is now available for the front hubs. While offering the standard kit geometry the hubs also allow to run shorter links which can be beneficial in a range of track conditions. The lightweight design and aircraft-grade 7075-T6 aluminium adds only minimal unsprung weight while still being sturdy and durable. RDRP’s C-hubs are usable on all XB4-series buggies and they are available in a 9 degree or 12 degree variant to adjust the corner characteristics of the buggy.

View more images here

September 4, 2017

TMG Speed ride height gauge & slider

TMG Speed have introduced their new ride height gauge and slider. The height gauge is adjustable between 15mm and 20mm but comes with two seats – one 5mm and one 10mm. This allows adjustment from 15mm to 30mm which is ideal for 1/10th and 1/8th applications. Also available now is the TMG slider which fits around the height gauge to easily allow to position the gauge without trying to reach under the car and getting a false height adjustment for the vehicle. The slider will also work well with TMG’s soon to be released 10mm to 15mm height gauge for indoor carpet setups.

View the slider here

September 4, 2017

VP-Pro stepped throttle/brake servo arms

VP-Pro have introduced their new aluminium stepped-design servo arm for throttle and brake applications. Machined from high-quality aluminium and coming with a black anodised finish and machined silver edge details the servo arm is usable for all nitro car applications that require a stepped arm. The clamping design greatly improves reliability and the servo horn is available for 23T, 24T and 25T spline servos.

Source: VP-Pro [vp-racing.com]

September 2, 2017

Samix TRX-4 high-clearance titanium link set

Coming from Samix and made for the Traxxas TRX-4 trail truck is the high-clearance titanium link set. Machined from high-quality titanium and coming in a natural finish and with etched markings for easy installation, the set makes for improved ground clearance, higher stability and better looks. It is understood that, beside the suspension link kit, Samix will also offer a set that additionally includes the steering and panhard rods.

View more images here