August 23, 2017

Hudy 20-30mm adjustable ride height gauge

Following the 14-20mm adjustable ride height gauge, Hudy now also have a 20-30mm variant available. Utilising the same compact design, the gauge is suitable for 1/10th and 1/8th scale off-road vehicles and it is very easy to use thanks to the laser-etched height markings and the screw-type design that allows to adjust the required ground clearance by unscrewing the upper cap and aligning the markings of the required ride height. The gauge is made of high-quality aluminium and it comes black anodised for wear and looks.

Source: Hudy [hudy.net]

August 23, 2017

Castle Creations Mamba X E-Buggy Racing Editions

Coming from Castle Creations are two new Racing Editions controller and motor combos for 1/8th E-buggies. Both make use of the Mamba X sensored speed controller that features Castle Creations’s latest firmware for smooth yet powerful throttle and brake control, data logging capacities including motor and speedo temperature and it features a strong 5.25V-8.0V 8A BEC system. A waterproof aluminium housing makes for go-everywhere capabilities and it measures a compact 54.4×35.2×30.0mm while weighing in at 101g. Included in the set are either the ROAR Mod approved 1512-1800kv or ROAR Mod pending 1515-2200kv brushless 4-pole/12-slot motors.

View the specifications here

August 23, 2017

Reedy Zappers 15.2V 4S 6400mAh LiHV hardcase battery

Reedy’s Zappers Lithium batteries are now also available in a 4S LiHV version for 1/8th E-buggies and trucks. Originally referring to Reedy’s proprietary NiMH voltage enhancement technology, Zappers describe Reedy’s high-voltage LiPo battery chemistry. A 15.2V nominal voltage means that with a suitable charger, the battery can be safely charged to 17.4V total or 4.35V per cell. Even when the typical 16.8V or 4.2V/cell charging limit is enforced, the battery still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. A high-quality, durable hardcase helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. A charge lead, balance lead, and male 5mm ESC connectors are included.

Source: Team Associated [teamassociated.com]

August 22, 2017

Kyosho tease two new vintage re-release kits

Kyosho fans rejoice! The Japanese company has released two teaser videos to promote the forthcoming release of two vintage kits one of which seems to be the mighty Javelin – one of the most expensive vintage kits to buy these days. The first video pretty much tells it all as Kyosho aficionados will spot the buggy’s iconic cage while the second clip teases the release of a monster truck-ish type of vehicle. We bring you more information on the two as they surface.

View a screen grab of the truck teasing video here

August 22, 2017

RDRP B64 rear chassis weight

Revolution Design Racing Products have introduced a new rear chassis balance weight for the Team Associated B64 1/10th 4WD buggy. It is the ideal tuning option for a range of track conditions as first and foremost it ensures a near perfect chassis balance when standard-size electronics and regular-weight batteries are used while also adding weight for improved rotation into corners and added traction in slippery track conditions. The weight comes machined from high-quality brass, it sports a nice black and golden finish for looks and it weighs in at 28g. Unlike RDRP’s other option parts it isn’t a direct fit as the left chassis side pod needs some DIY, although the work is carried out in under five minutes using a Dremel.

View another image here

August 22, 2017

PR Racing SB401 rear aluminium uprights

Coming from PR Racing and made for the SB401 1/10th 4WD buggy are new vertical ballstud aluminium rear uprights. The parts offer a greatly revised geometry over the standard composite hubs with an additional camber link mounting position that uses a longer camber link for a less twitchy car and smoother rotation trough the corner. Also new is an additional – higher – hinge pin location that provides increased rear traction and better bump handling. The parts weigh in at 16g a pair which is only 1g heavier than the standard composite uprights.

Source: PR Racing [pr-rc.com]

August 22, 2017

Exotek B6 upper steering brace & Flite top shaft vUSA

Coming from Exotek are new option parts for the Team Associated B6 series of 2WD buggies. First up is the upper steering brace and sleeve set. The kit strengthens the steering assembly from bending at the mounting screws as well as provides support to keep the steering crank bearings from binding and breaking thanks to the included crush sleeve set. The brace is shaped to fit into the pocketed area of the upper plate and keeps the steering from bending or flexing at the bearing screws. At only 1.2g for all three parts the set hardly adds any weight to the front end of the vehicle.

Continue reading here

Mibosport
TargetRC
VP Racing
T-Works