Red RC » P Off Road

April 1, 2016

Serpent Cobra SRX8 buggy

SerpentSRX8-1

Following a number of teasers, Serpent have finally released their all new Cobra SRX8 1/8th scale buggy. Designed by Billy Easton, the focus was on performance, ease of use and durability. A very well specced kit, the major changes include new gear-differentials that have a larger case to allow for more oil inside and a built in pressure compensation system, resulting in a more consistent diff over longer runs. A new gear-mesh plate system allows for easy and secure engine (dis)assembly without worrying about gear mesh. For tuning, the front and rear lower wishbones allow inserts to be both mounted in the top and bottom for many possible flex options, using no inserts, moulded inserts, carbon inserts, or mixed of both inserts. Finally the new angled steering system offers optimal Ackermann settings as well as reduced bumpsteer.

View more details and images here

April 1, 2016

Xray XB2 4-gear gear box

Xray have released this optional molded composite motor gear box for the XB2, which accommodates 4 gears and orientates the motor on the left side. All parts fit perfectly together, and give super-easy access to the rear differential. The durable gear box houses the differential and rear transmission, allowing the mounting of the rear roll center holder, motor plate, and rear shock tower.

Source: Xray [teamxray.com]

March 31, 2016

Xray XB4 +3.75mm Offset wheel hubs

New for the XB4, Xray have produced these CNC-machined 12mm wheel hubs with +3.75mm offset for wider track-width. Made from Swiss 7075 T6 aluminium they have been strategically machined for optimum strength, balance and lightness. Marked for easy identification they are secured onto the drive axle with a setscrew.

Source: Xray [teamxray.com]

March 31, 2016

Intech Racing ER-12M 2.0 Lite

Intech Racing have released the ER-12M 2.0 Lite, which is the lightened version of ER-12M 2.0 and saves extra 61 grams compared with the stock unit. The all-new aluminium honeycomb chassis, aluminium motor plate and a pair of composite side guards are included and these parts feature milling and holes to reduce the weight while maintaining durability and rigidness.

Source: Intech [intechracing.com]

March 30, 2016

Intech BR-6 optional new gear ratio

Intech have announced the release of an optional new gear ratio for the BR-6 nitro and electric buggies. An optional 40T crown gear with 12T pinion gear for the front and rear differentials and a 46T steel spur gear with 13T clutch bell for the centre differential give a final gear ratio of 11.79. All gears are machined from the rigid steel and lightened with milling and holes and come laser-engraved with the teeth numbers which allows for quick and easy identification. These durable gears increase drivability on low traction and bumpy track conditions to improve lap times even in the most extreme racing conditions. The complete gear set includes a pair of lightweight 40T crown gears and 12T pinion gears, a 46T lightened steel spur gear, a 13T clutch bell, and an aluminium centre diff plate spacer for extra spur gear clearance from the chassis.

Source: Intech [intechracing.com]

March 30, 2016

Xray XB2 composite battery straps

New from Xray for the XB2 Dirt Edition are two new battery straps made from a special composite material. Available in two different hardnesses for various track conditions, the standard (medium) version is recommended for very-low to low-medium traction tracks while the hard version is best suited to low-medium to medium-high traction tracks.

Source: Xray [teamxray.com]

March 29, 2016

Xray Lightweight XB2 body shell

Xray introduce the 0.5mm thick light weight version of their high-performance, low-profile aerodynamic XB2 body. Used by the Factory Team in medium to high-traction conditions the thinner material ensures that the car has less weight at the highest point for less roll, increased cornering speed, and more aggressive handling.

Source: Xray [teamxray.com]

March 25, 2016

New Serpent SRX8 teaser images

Serpent have released a couple of teaser images of their forthcoming SRX8 1/8th scale nitro off-road buggy. According to Serpent the vehicle will feature “stunning standard equipment and cool innovations” while being “performance packed and made to last”. Some of the visible features include a newly designed radio box, updated linkages, as well as the Avenger bodyshell and a new flat medium downforce wing as standard. More information should become available by the end of the month.

View more images here