Coming from Serpent and made for the Cobra SRX8 buggy are optional carbon fibre Ackermann plates. To the standard “1” plate add the optional 0, 2, 3 and 4 plates that allow to fine-tune the steering Ackermann geometry. The plates are made from 3.5mm carbon fibre, they are marked for easy identification and come in sets of two plates.
French company Racing Experience has introduced their new EFRA 2135 off-road exhaust. Manufactured by Hipex the super-strong pipe was developed to offer exceptional performance especially with O.S. based engines but it also works great with 5-port Picco based propulsion. The exhaust is available as a complete set including silicone gaskets and mounting springs as well as O.S. or Picco specific manifold.
Source: Racing Experience [racing-experience.fr]
Coming from Exotek and made for the TLR 22 3.0 buggy are several new option parts. First up is the RF LRC suspension hanger made from heavy brass material. The rear front suspension hanger weighs in at 24g and it is of the low roll centre configuration. The part comes black anodised and adds weight in front of the rear A-arms which can increase traction in low to medium-bite conditions.
Available soon from HB is the D815 V2 1/8th nitro off-road buggy. The follow-up model of the IFMAR World Championship winning car includes a range of option parts such as an extended chassis plate that adds 4mm of length to the rear end to allow for a longer wheelbase while also shifting the weight distribution for improved stability especially in high-speed corners. Additionally also the standard chassis plate is included in the kit to make for a wider setup range from stock. Along with the +4mm chassis comes a +4mm centre driveshaft plus a range of other optional parts such as carbon fibre suspension inserts, additional carbon fibre camber plates for the rear hubs as well as the “high” rear wing mount and the #4 carbon fibre Ackermann plates that provide a different Ackermann angle for more all-round steering, especially on high-traction or very technical tracks.
View the included option parts here
Cox have introduced oil-filled aluminium shock absorbers for Kyosho’s Optima 2016 1/10th 4WD buggy. Machined from aluminium and coming with a high-precision finish the shocks offer an increased oil volume and travel compared to the standard “red” shocks. Design-wise the dampers are oriented at Kyosho’s iconic “gold” shock absorbers and thus they are making a cool period-correct option part. The shocks are available as separate front and rear sets including springs and also as combo package including both the short front and long rear shocks.
Tekno RC have updated their high downforce wing that features new smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions. The wing is available in the three colours of black, yellow and white.
Made for the SRX8 1/8th nitro off-road buggy is Serpent’s new 1-piece engine mount. Machined from 7075-T6 aluminium the monobloc mount was designed to increase stiffness around the engine area which results in more consistent gear mesh and also an overall stiffer chassis. The grey anodised part is a direct fit and it come laser-etched with Serpent logos.
New from Pro-Line and made for the Traxxas E-Revo and Summit monster trucks are the Pro-Spline HD centre driveshafts. Made from hardened black oxide coated steel, the Pro-Spline drive shafts have a true 6-sided spline that slides smoothly throughout any chassis flex without having to worry about stripping out like the stock plastic drive shafts. The pins are held in place by fully surrounded steel springs and M3 set screws on both ends to handle extreme performance. They come pre-Assembled and fit both the E-Revo and Summit kits.
