Red RC » P Off Road

May 14, 2015

Tamiya news at the Shizuoka Hobby Show

Tamiyablog have released first images of forthcoming Tamiya kits on show at this week’s Shizuoka Hobby Show. First up is of course the new TRF211XM 1/10th 2WD mid-motor buggy. By the look of things the buggy makes use of the proven TRF201 front and rear end as well as the 201’s gearbox with the chassis being made using a new composite material that combines the stiffness of an alloy chassis with the light weight of composite plastic for improved on-track performance. We do not have any information if the white colour chassis will make it into the kit or if the buggy will come with a dark colour one, once the hype about the new chassis material has settled a bit.

Click here to continue reading

May 13, 2015

JConcepts T5M titanium knurl tip front axles

Made for the Team Associated T5M are the new titanium knurl tip front axles from JConcepts. The design is based around a high-quality titanium construction, and a knurled axle tip for finger control and access. Finger control gives the mechanic a grippy place to rest a finger so the front tyre doesn’t rotate easily during changes making the process quicker and with less frustration. The design also eliminates screws and other items which are hard to inspect for issues which limit performance and add additional weight. The light-weight, free spinning design includes axle roll-pins to allow easy assembly of a necessary but (not included) clamping hex adaptor.

Click here to view another photo

May 13, 2015

Muchmore Impact FD2 square LiPo battery pack

Muchmore have a new addition to their Impact FD2 line of competition LiPo battery packs available in the form of a 2S square pack. Made using 100C 5800mAh cells the pack is usable in a range of applications such as 2WD buggies and trucks and generally in all vehicles that normally use a side-by-side saddle pack configuration. The hardcase battery measures 69×92.5x25mm, it weighs in at 260g and utilises 5mm bullet-type connector tubes and a 2mm balancer port.

Source: Muchmore [muchmoreracing.net]

May 13, 2015

Exotek RB6 strap & twist nut shorty LiPo mount set

Exotek introduce the new strap and twist nut shorty LiPo mount set for the Kyosho RB6, RT6 and SC6. It includes adjustable twist nuts for precise battery holding and that factory team look while the battery strap is shaped for extra room around the LiPo plugs. Included is a USA-made carbon fibre strap and polished and anodised factory red posts and twist nuts. The set is usable alone or with Exotek’s optional rear carbon brace set.

Click here to view another photo

May 13, 2015

Team Associated Kashima-coated V2 Fox shocks

New from Team Associated come the Factory Team V2 Fox shock bodies with genuine Kashima coat. The shocks have the same attributes as the shock coat found on the buttery-smooth Fox Factory Series forks and shocks, providing extended life and silky-smooth shock action. The shock shafts use a screw to secure the piston and there are two coatings to choose from: TiN shafts for the longest life and Factory Team chrome shafts for the smoothest action. The pistons come machined for a precision fit and finish and their edges have large radiuses for the smoothest shock action. Also available are blanks for customising own piston hole combinations. The shock accessories are available in a range of different sizes to fit Team Associated’s 1/10 scale 2WD and 4WD electric buggies, as well as 1/10 scale 2WD electric trucks and short course vehicles.

Click here to view a photos of the pistons & shafts

May 13, 2015

Avid D413 12mm aluminium hex set

Coming from Avid and made for the HB D413 1/10th 4WD buggy is a 12mm aluminium hex set. Offering an innovative pin retaining system to hold the front drive pins in place the conversion does away with the annoying “pin dropping out to never be found again” the original front hexes sport. The front hexes are machined in a way to utilise an internal O-ring that holds the pin in place once the wheels are off. For the rear adapters the proven clamping system is used utilising a stainless steel 2-56 clamp screw. The chamfered edges of the 6061-T6 alloy parts make for easy wheel installation and each package includes a pair of 12mm hex front and a pair of 12mm hex rear adapters, three front O-rings, two 2-56 clamping screws, O-ring install instructions, and an Avid mini decal sheet.

Source: Avid [avidrc.com]

May 12, 2015

JConcepts Reflex 1/5th scale tyre

Following the introduction of the Chasers large scale off-road tyre, JConcepts now also announce the release of the Reflex tread. The yellow compound tyre has square angled pins that are stacked vertically to flex and fold evenly across the tyre. Typically a stacked tread will wear less and provide more forward bite while the aligned space helps rotation in the turns and gives a snappy release to square up quickly. Easily one of the smaller pin tyres available for 1/5th off-road, the Reflex is a beefed up version of its 1/8th scale sibling scaled up in size to withstand heavy abuse but just nimble enough to offer optimised response. To make them interchangeable, the tyre beads and inner carcass have been designed to use the stock Losi 5ive insert and fit directly to the already established bead-lock wheel. The inner tabs built into the carcass interlock with the Losi bead-lock style wheels for security.

Source: JConcepts [jconcepts.net]

May 12, 2015

Serpent Spyder SRX-2 mid-motor RTR buggy

Serpent’s Spyder SRX-2 1/10th 2WD mid-motor 2WD buggy is now also available in a ready-to-run variant. Based off of the popular Spyder competition buggy the bashing and club level racing RTR variant sports many race-worthy features such as the highly adjustable suspension with composite inserts and 12mm threaded aluminium big bore shock absorbers and the tough transmission with a compact gear differential and slipper-less direct drive as well spring steel driveshafts. The buggy, that comes with an all-composite tub chassis, also includes orange-seal ball bearings, Dragon-RC pre-mounted tyres on 12mm hex wheels and a pre-designed bodyshell and wing. The package is rounded out by a powerful 3000kv sensorless brushless motor, waterproof Dragon-RC speed controller, high-quality steering servo and a 2.4GHz 3-channel radio system.

Click here to view the features and more photos