Red RC » P Off Road

October 16, 2015

Exotek Exo22T mid motor chassis set

Exotek have introduced the Exo22T mid motor chassis conversion kit for the TLR 22T and mid motor converted 22T 2.0 stadium trucks. With its simple and efficient layout, the Exo22T offers improved rearward weight positioning of the battery and electronics to better suit a variety of track conditions. The chassis allows standard inline shorty battery positioning or the easy to drive side ways mounted shorty battery installation. Included in the set is a black anodised 2.5mm 7075 alloy chassis with 5mm carbon side rails for proper stiffness and strength. Pocket milling in the chassis lowers the battery and speed controller for a lower overall centre of gravity while the included carbon LiPo strap also acts as a top plate. The LiPo strap is fastened to the rear alloy brace and two alloys posts and part of the package is also a machined 7075 alloy nose plate that is used for durability while allowing for inexpensive chassis swaps.

View the features and more photos here

October 16, 2015

PR Racing S1 V3 lightweight chassis

PR Racing USA have introduced the all-new lightweight aluminium chassis for the S1 V3 2WD buggy. Lightweight yet rigid the chassis is made from high-quality gun-metal anodised aluminium and it sports carbon fibre insets to reduce the overall weight by 30 grams. The chassis is a direct fit and ideal for all applications where a low weight is needed such as in spec motor classes.

Source: PR Racing [prracingusa.net]

October 15, 2015

Absima 1/8th buggy wheel sets

German company Absima have new wheel sets for 1/8th buggies available. First up is a tyre called Dirt that features a massive multi-surface tread to tackle a wide range of track conditions and surfaces such as asphalt, dirt, grass and more. The tyre sports a 117mm diameter and a width of 40mm and it comes pre-glued on black disc rims compatible for virtually all 1/8th buggies out there. Also new are two sand paddle tread tyres of different shape. The larger tread comes pre-glued on black rims while the finer tread is mounted to while 5-spoke wheels. The tyres are ideal for bashing in the snow and sand.

View the other new tyres here

October 15, 2015

HPI Baja 5B Flux Ultimate Power Pack set

Coming from HPI Racing and made for the Baja 5B Flux large scale buggy is the Ultimate Power Pack set. Included are two softcase 14.8V 5300mAh 60C LiPo battery packs that snuggly fit into the buggy’s tough plastic battery box. The packs come pre-wired with T-type connectors and also included is a suitable jumper wire. Despite fitting into other vehicles HPI strongly recommend to use the batteries only in cars with battery boxes to not leave them unprotected from the elements.

Source: HPI Racing [hpiracing.com]

October 14, 2015

JConcepts B5M honeycomb aluminium chassis

Seen for the first time at last week’s IFMAR 1/10th Off-road World Championships JConcepts have now officially introduced the honeycomb lightweight aluminium chassis for the Team Associated B5M. Machined from hard anodised black aluminium and sporting milled hex shaped pockets the chassis also features aluminium islands in the electrics compartment which are left to allow an electrical footing area for mounting and wiring needs. The hex pockets in the centre of the chassis have been cleared for sensor wire or miscellaneous wire routing. All edges of the honeycomb pockets have been highlighted with chamfered edging all around, bringing out an luxurious look. The honeycomb chassis weighs in at 112 grams, some 23 grams less than a stock counterpart all while still remaining structurally sound, making it deal for stock and modified racers alike.

content

October 14, 2015

Pro-Line hard 1/10th buggy rear foams

Available soon from Pro-Line are hard rear foams for 2.2″ 1/10th buggy tyres. Used by Ty Tessmann to TQ and win at the 2015 Pro-Line Cactus Classic the hard foams are of a solid closed cell design with no internal grooves for maximum hardness and durability. They offer maximum support for the tyres, are ideally used on high-bite surfaces and come in pairs.

Source: Pro-Line [prolineracing.com]

October 14, 2015

New Pro-Line truck bodies & tyres

Pro-Line have several new products for a range of 1/10th scale trucks available in the form of bodyshells and tyres. First up is the pre-painted Flo-Tek Fusion body for 1/10th short course trucks. The recently introduced body is a performance-oriented blend of the Flo-Tek and the Evo and it comes pre-cut and pre-painted to get you on the track even faster. Fitting many of today’s popular trucks the body just needs body post holes and off you go.

Continue reading here

October 14, 2015

Motiv HV Super Fan with fan guard

Available now from Motiv is the HV Super Fan with fan guard. The high-speed super fan features dual ball bearings and is rated to handle 8.4 volts with ease but is still strong enough to have good air flow running off lower voltage. Included is a 3D-printed fan guard to save that precious pinky from the threat of annihilation.

Source: Motiv RC [motivrc.com]