Red RC » P Off Road

May 15, 2015

JConcepts Hustle Slash & Slash 4×4 short course wheel

JConcepts Hustle Slash & Slash 4x4 short course wheel

New from JConcepts comes the Hustle wheel for the Traxxas Slash and Slash 4×4 short course trucks. The Hustle wheel takes into account the durability needs of the Slash racer without compromising looks. 6-spoke design rotates about the centre of the wheel with a deep recess in the centre which allows plenty of footing for wheel locknuts. The base features the black wheel appearance and 6 moulded mock locknuts which bring a realistic look. In-between the spread 6 spokes rests small grooves which break up the pattern adding a split personality to the overall design. The entire face of the wheel has been plated with a silver coating which gives racers a little more luxurious look to match-up to the variety of 1:1 inspired bodies on the market. The moulded black colour of the wheel shows through in the extra depth of the spokes which was specifically designed into the wheel. Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance.

Source: JConcepts [jconcepts.net]

May 14, 2015

Ultimate M-5 & M-8 get updated

Modelix Racing have announced some small updates to their range of Ultimate engines. To build on the M-5 and M-8’s well established base, both engines now feature an all new black coloured head which has been slightly modified to increase the amount of air flow going through the glow plug area and keep the temperature of the plug cooler. Both the M-5 and M-8 engines also now come with the new Novarossi patented dual rubber sealed bearings installed. These new additions help the engines to run more stable and give drivers/ mechanics an easier tuning engine. Finally, Ultimate M-5 and M-8 tuned engines are also available in combos at very competitive prices.

View more engine images here

May 14, 2015

Tamiya news at the Shizuoka Hobby Show

Tamiyablog have released first images of forthcoming Tamiya kits on show at this week’s Shizuoka Hobby Show. First up is of course the new TRF211XM 1/10th 2WD mid-motor buggy. By the look of things the buggy makes use of the proven TRF201 front and rear end as well as the 201’s gearbox with the chassis being made using a new composite material that combines the stiffness of an alloy chassis with the light weight of composite plastic for improved on-track performance. We do not have any information if the white colour chassis will make it into the kit or if the buggy will come with a dark colour one, once the hype about the new chassis material has settled a bit.

Click here to continue reading

May 13, 2015

JConcepts T5M titanium knurl tip front axles

Made for the Team Associated T5M are the new titanium knurl tip front axles from JConcepts. The design is based around a high-quality titanium construction, and a knurled axle tip for finger control and access. Finger control gives the mechanic a grippy place to rest a finger so the front tyre doesn’t rotate easily during changes making the process quicker and with less frustration. The design also eliminates screws and other items which are hard to inspect for issues which limit performance and add additional weight. The light-weight, free spinning design includes axle roll-pins to allow easy assembly of a necessary but (not included) clamping hex adaptor.

Click here to view another photo

May 13, 2015

Muchmore Impact FD2 square LiPo battery pack

Muchmore have a new addition to their Impact FD2 line of competition LiPo battery packs available in the form of a 2S square pack. Made using 100C 5800mAh cells the pack is usable in a range of applications such as 2WD buggies and trucks and generally in all vehicles that normally use a side-by-side saddle pack configuration. The hardcase battery measures 69×92.5x25mm, it weighs in at 260g and utilises 5mm bullet-type connector tubes and a 2mm balancer port.

Source: Muchmore [muchmoreracing.net]

May 13, 2015

Exotek RB6 strap & twist nut shorty LiPo mount set

Exotek introduce the new strap and twist nut shorty LiPo mount set for the Kyosho RB6, RT6 and SC6. It includes adjustable twist nuts for precise battery holding and that factory team look while the battery strap is shaped for extra room around the LiPo plugs. Included is a USA-made carbon fibre strap and polished and anodised factory red posts and twist nuts. The set is usable alone or with Exotek’s optional rear carbon brace set.

Click here to view another photo

May 13, 2015

Team Associated Kashima-coated V2 Fox shocks

New from Team Associated come the Factory Team V2 Fox shock bodies with genuine Kashima coat. The shocks have the same attributes as the shock coat found on the buttery-smooth Fox Factory Series forks and shocks, providing extended life and silky-smooth shock action. The shock shafts use a screw to secure the piston and there are two coatings to choose from: TiN shafts for the longest life and Factory Team chrome shafts for the smoothest action. The pistons come machined for a precision fit and finish and their edges have large radiuses for the smoothest shock action. Also available are blanks for customising own piston hole combinations. The shock accessories are available in a range of different sizes to fit Team Associated’s 1/10 scale 2WD and 4WD electric buggies, as well as 1/10 scale 2WD electric trucks and short course vehicles.

Click here to view a photos of the pistons & shafts

May 13, 2015

Avid D413 12mm aluminium hex set

Coming from Avid and made for the HB D413 1/10th 4WD buggy is a 12mm aluminium hex set. Offering an innovative pin retaining system to hold the front drive pins in place the conversion does away with the annoying “pin dropping out to never be found again” the original front hexes sport. The front hexes are machined in a way to utilise an internal O-ring that holds the pin in place once the wheels are off. For the rear adapters the proven clamping system is used utilising a stainless steel 2-56 clamp screw. The chamfered edges of the 6061-T6 alloy parts make for easy wheel installation and each package includes a pair of 12mm hex front and a pair of 12mm hex rear adapters, three front O-rings, two 2-56 clamping screws, O-ring install instructions, and an Avid mini decal sheet.

Source: Avid [avidrc.com]