American based ProStar RC has released these new Aluminium Bulkheads intended for use on the 1:10 chassis offerings from Tekno. Suitable for the SC410SL, ET410, EB410, & .2 versions, as well as the SC2410T Short Course Conversion by ProStar RC, the are produced from T7 Aluminium and gold anodise finished. Laser engraved with the ProStar RC logo the bulkhead upgrade weights 44 grams and offers much greater durability than the kit standard part.
Factory Team has released a Diff Decoder which is says is an indispensable tool for the hardcore racer. The Diff Decoder displays a consistent, measured value for differential hardness rather than relying on an estimation or feeling. This measurement can be used to build differentials to a specific hardness, fine tune to improve vehicle performance, understand the differences between oil brands and temperature, or to replicate an existing differential. The Diff Decoder’s machined aluminium body is compact and lightweight with a 5-digit LED display suitable for measurement of a wide variety of differentials. Includes three adapters: one 1:10 7mm hex to measure at the wheel, and 1:10 and 1:8 pin adapters to measure at the diff outdrive. A 5V power source is required to operate.
Hong Kong’s Takashima D-13 has launched two 4-channel 2.4G wireless receivers. The RX-492 receiver supports the Sanwa FH-5 mode, while the RX-482 receiver supports the FH-4 operational mode. Both products weigh only 7g and are 28×20.5×18.5mm in size making them a highly cost-effective alternative choice.
Sworkz has a new 1:8 Nitro Buggy with the release of the S35-4 EVO. The geometry from the Worlds Edition conversion kit provides optimised cornering speeds with a more easy handling feel and maximum traction. The S35-4 EVO features a T7075 hard anodised and lightened aluminium chassis with a new short wheel base design that was tested for a long time by our factory pilots which guarantee the best speed balance for both front and rear suspensions. HET differentials are included in the kit while the High Density Clutch Bell system are optional. The new S35-4 EVO comes with a brand new steering Lay-Down Type Steering Bell crank servo saver system. This new Ackerman design provides the driver with better control over the S35-4 EVO buggy.
ROAR, the sanctioning body for RC racing in the United States & Canada, has announced the completion of its Executive Committee with the appointments of Brent Densford as Competition Director and Lance MacDonald as Promotions Director. Under the guidance of new President Clayton Young, ROAR appears to be on a much overdue positive trajectory and the latest appointments should be a boost to national championship racing and the bobby in general. Densford is the owner of Beach RC while MacDonald has vast experience in race organisation and so their combined experience and knowledge should assist ROAR in being more more proactive in the promotion of the hobby as opposed to just being a rule enforcer.
Read official ROAR announcement here
Following Donathen RC’s launch of its Amped Up RC range of off the shelve cables, they have released the first 3 products, 2s Balance Charge Leads. These leads are designed by DRC using DRC proportions, DRC connectors, 10 awg wire, and adhesive heat shrink. Each lead is fully protected with black sheathing covering all wires, increasing the protection, and lifespan of the lead. This sheathing can easily slide around with regular heat shrink, that is why we offer these leads with dual wall adhesive heat shrink. Not only does the adhesive heat shrink keep the sheathing in place, it adds durability, sturdiness, and molds to the connection providing the best protection available. To start, Amped Up RC is offering 3 balance leads, 5mm bullet connectors, Xt90 connectors, and Qs8 connectors 24″ long made with 10 awg wire. A unique feature of these leads is that they can be used with any charger that uses a JST-Xh balance housing.
In just three weeks time the first wheels will be turning at the 2023 IFMAR 1:10 Offroad World Championships and Red RC is excited to announce we have teamed up with Ruddog Racing to bring our readers full trackside coverage from Arizona. Having been at Yatabe Arena in Japan in 2015 to witness both Spencer Rivkin and Bruno Coelho claim their first World Championship titles, we are super excited to be travelling to Hobby Action RC Raceway to see if either driver can defend their title and become 3-time Champions. After waiting an extra year for the 19th running of the race that decides the greatest prize any driver will achieve, the anticipation of the battles between the best racers in the World and the unearthing of the sport’s next generation of racing talents is higher than ever. The first of four World Championships Red RC will attend this year our coverage from Arizona is being supported by Ruddog. Founded in 2006 by Sven Rudig, himself an avid offroad racer, Ruddog is steeped in offroad racing history being a distributor for 31 times World Champion manufacturer Team Associated and iconic offroad tyre brand JConcepts to name but a few. In addition, they have developed their own product ranges such as Ruddog Racing, a new line of electronics offered by the German company that already has a European Championship title to its credit in touring car. Revolution Design Racing Products has established itself as a designer & producer of high-quality tuning parts and are popular upgrades among offroad racers. Red RC’s trackside coverage of the 1:10 Offroad World Championship will kick off on September 10th with the start of the 4WD action and conclude on September 16th when 2WD Champion is decided.
View World Championship schedule here
Revolution Design Racing Products has two new accessories for nitro racing. First is the Ultra Exhaust Pipe Clamp which offers a sturdy and efficient way to secure the exhaust pipe in most 1:8 and 1:10 Offroad and Onroad vehicles. Crafted from premium 7075 aluminium, it provides durability while remaining lightweight. This clamp can either be fixed mounted, acting as an additional safeguard to the set screw in the pipe, or used in a floating configuration to allow for more flexibility. In the floating setup, the pipe is secured solely by the two set screws of the Ultra Exhaust Pipe Clamp. The black anodising, combined with the silver chamfers, gives the clamp an attractive and professional appearance. Installation is easy and straightforward, enabling you to enhance the control and stability of your exhaust without consuming much time and effort.
