Red RC » P Off Road

January 28, 2015

Losi Ten SCTE Troy Lee Designs RTR

Horizon Hobby introduce the Ten SCTE Troy Lee Designs RTR 4WD short course truck. Based on the 2013 and 2014 ROAR Nationals winning vehicle the kit offers a factory assembled 4WD shaft-driven chassis, sturdy suspension components and full RTR specifications with a 3900kv Dynamite 540-size 4-pole brushless motor, a 130A LiPo-compatible and waterproof Dynamite speed controller, a Spektrum DX2E 2.4GHz radio set and waterproof Spektrum steering servo and electronics. The truck comes including a pre-painted bodyshell rocking the TLD logo and graphics, black and orange beadlock design wheels and grippy racing tyres.

Click here to view the features and more photos

January 28, 2015

Schelle B44.3 -3mm chassis & B5 uprights

Coming soon from Schelle are some new options for the Associated B5 and B44.3. For the B5 there is a new 2-piece aluminium rear hub. The new design helps prevent the ball being pulled from the upright in an impact, while at the same time being replaceable if it gets damaged. Only 1 gram heavier than the stock part it features molded bearing inserts and allows for fine adjustment of the link position, relative to the upright, through the use of shims. For the 4wd B44.3 there is a new 3mm shorter aluminium chassis plate with corresponding top deck. The new setup helps create more on power traction as well as make the car turn more fluidly in the corners. Finally from Schelle is a small bottle of synthetic bearing oil, which is the same oil used on their ceramic bearings, but can now be used on all your bearings for its very fine low drag characteristics. Comes in a handle bottle with fine tip for precise application.

View more images of the new products

January 27, 2015

MCD RR5 cab forward bodyshell

MCD Racing have a new optional bodyshell for the RR5 large scale buggy available. Sporting a distinctive cab forward design and an aggressive overall appearance the body is meant to produce more front and centre downforce, resulting in a more aggressive steering response. A cutout in the rear section improves engine cooling for better overall performance in hot weather and the body comes with a spark plug protector that keeps away harm from the engine in the event of a roll-over.

Click here to view another photo

January 27, 2015

Team Azarashi B5M prototype bodyshell

Japanese company Team Azarashi have first images of their yet unnamed prototype bodyshell for the Team Associated B5M buggy available. Sporting the distinctive Azarashi lines the body does away with today’s ubiquitous cab forward design in favour of a more conventional looking mid cab appearance. We do not have a release date yet but we bring you more information as soon as they become available.

Click here to view more photos

January 27, 2015

Team Titan H.V. 40mm cooling fan with tabs

Team Titan have a new 40mm cooling fan available that features an open board with solder tabs for the receiver connection wire over the standard fixed wire most of today’s units offer. The high voltage high speed fan comes with an easy to replace 170mm black universal plug wire than can be cut to length to allow for professionally looking wiring jobs.

Click here to view another photo

January 26, 2015

RDRP B5 aluminium wing mount set

Revolution Design Racing Products introduce the B5 aluminium wing mount for Team Associated’s rear motor 2WD buggy. Designed to replace the standard plastic mount with a more durable solution the parts are machined from 7075-T6 aluminium and they are coming blue anodised for improved looks. The wing mount is not only a lot more durable than the kit parts but also makes for a more solid base especially for larger or heavier wings, which leads to improved aerodynamic efficiency. As usual with RDRP’s latest line of Team Associated options the parts sport a cool blue colour and laser-etched logos for that factory look.

Click here to view another photo

January 25, 2015

MIP B5M aluminium 3-gear transmission

During this weekend‘s Reedy Offroad Race of Champions MIP have a new 3-gear transmission for Team Associated’s B5M buggy to show. The sturdy 7075 aluminium case offers improved precision, optimised gear mesh and thus higher efficiency compared to the standard moulded cases. At the same time the transmission package is relatively of the same overall weight as the OEM 4-gear transmission, keeping the weight distribution the same as what the car was designed for which can often be more beneficial than scrubbing tons of weight. Also as the motor sits at a 3mm offset to the left an optimised left to right weight balance is achieved – the needed spacer and new spring will be supplied with the transmission kit. On top of that the all-alloy gearbox will act as a giant heatsink, making for improved motor cooling and a reduced power fade during a run. The 3-gear design also makes for a more efficient operation making the gearbox ideal for stock and modified racers alike.

Click here to view more images

January 24, 2015

VP Pro RS-602 high-output glow igniter

VP Pro have their new RS-602 high-output glow igniter available. Made from anodised aluminium and stainless steel and coming quipped with a single 5000mAh cell the igniter offers a higher capacity than the previous model for longer lasting power per charge. Included comes a suitable overnight wall charger.

Source: VP Pro [vp-racing.com]