Red RC » P Off Road

April 10, 2015

KO Propo carbon servo horn & black servo lead

KO Propo America introduce the new carbon fibre servo horn for 1/12th scale cars and an all-black servo lead. Starting with the servo horn, made for 1/12th scale cars the 3-piece part made from carbon fibre and gun metal anodized aluminium offers higher rigidity and a more direct feeling than a conventional servo saver. The carbon lever sports five mounting points for the steering linkages and the assembly fits all servos with KO Propo compatible output gear spline. Also new is a black servo lead with gold connector for those who are after that cool all-black wire setup in their cars.

Click here to view more photos

April 9, 2015

JConcepts B5 aluminium wing shim

New from JConcepts come wing shims for the Team Associated B5 and B5M. The buggy offers the option of adjusting the wing angle by changing the direction of the shim or the height by running the shim below or above the wing. JConcepts is now offering the wing shim as a machined aluminium component, available anodized in blue or black colours. The edges are finished with a small highlight chamfer where possible to provide that all important glamorous look. The shim is light-weight and has built in screw bosses on each side which allows the driver to completely secure the shim to the wing with 3mm screws (not included) front and back. The shim has a built in rake of 3 degrees in one direction and shaped to fit around the stock plastic wing mounts or part of the JConcepts screw-down aluminium wing mount system. Utilizing the shim in one direction gives the wing zero degrees or in the opposite direction gives 6 degrees of angle. Placing the shim on top will angle the wing at 3 degrees. Simply drop the new shim onto the wing mounts for a more rigid assembly and secure if preferred with 3mm screws.

Click here to view more photos

April 9, 2015

Serpent Cobra Be 2.1 1/8th E-buggy kit

Serpent introduce an updated version of their Cobra 1/8th E-buggy, the Cobra Be 2.1. The new variant features some subtle but performance and durability enhancing changes compared to its predecessor such as 14 degrees aluminium C-hubs, new V2 rear uprights, wheel axle rubber boots, 98mm driveshafts and V2 wheel axles. Also included is a 2.3mm front anti-roll bar. Otherwise the kit, that was driven by Serpent Factory driver Jörn Neumann to a fine 4th place at the recent NeoX, remains unchanged.

Click here to view more photos

April 8, 2015

JConcepts Smoothies 4WD front slick tyres

JConcepts’ Smoothies 1/10th off-road slick tyres are now also available in a 4WD front variant. Released as a 60mm bead mounting diameter, the tyres mount straight to the latest generation wheels for that all important reactive feel. The carefully profiled tyre carcass rolls through the turns with efficiency while the maximum smooth surface area grips perfectly on surfaces such as prepped “indoor” clay. The Smoothies include Dirt-Tech 60mm inserts and they are available in gold and green compounds.

Source: JConcepts [jconcepts.net]

April 8, 2015

Schumacher Cougar KF2 front top deck & pivot blocks

Schumacher have two new option parts for the Cougar KF2 available in the form of a carbon fibre front top deck and optional rear toe-in blocks. Starting with the top deck, the carbon fibre part allows to fine-tune the front stiffness of the chassis and it can be used where traction is very high and the car needs more stability. The top deck incorporates a fan mount to keep the motor cool under high load conditions.

Click here to continue reading

April 6, 2015

TLR Ten-SCTE/2.0 thick sway bar set

Coming from TLR and made for the Ten-SCTE and 2.0 kit is a thick sway bar set. Offering larger diameter wires than the standard set the thick sway bars come in handy especially on high-grip surfaces such as carpet and astro turf. Included are three black colour front and three rear sway bar wires.

Source: TLR [tlracing.com]

April 3, 2015

X Factory Infinity B5M side stiffeners

Coming from X Factory’s Infinity option parts line and made for the Infinity Team Associated B5M chassis is a set of chassis side stiffeners. X Factory’s Infinity B5M chassis has been very successful over the past six months, most notably taking all four rounds of qualifying in Stock Buggy at the Cactus Classic. With all screws in the side rails and side decks tightened securely the CF chassis is quite stiff, but some drivers desire an even stiffer platform on certain high-bite tracks. These side stiffener plastic parts answer the calls. Super-easy to install, the driver just removes the bolts holding the side decks on, drops the new stiffener in, and re-tighten the side deck bolts. Therefore, chassis stiffness can be adjusted in just a minute.

Click here to view the part installed

April 2, 2015

DKT MBX7R graphite front steering plate

Available soon from DKT is a graphite front steering plate for the Mugen MBX7R. The part offers improved steering response and durability compared to the standard composite plate and it comes with a set of aluminium spacers for a drop fit.

Source: DKT [dktshop.com]