Red RC » P Off Road

December 1, 2014

JConcepts SCT & Stadium Truck Dirt-Tech inserts

JConcept’s popular Dirt-Tech inserts are now also available for SCT and Stadium Truck applications. Designed with the input of Brian “Dirt” Kinwald the grey-colour medium-firm density inserts are of an extremely light weight and they are ideal for medium to extremely high bite conditions. The reusable foam rings come in pairs and the specific variants fit most 1/10th short course and 1/10th stadium truck tyres.

Click here to view the stadium truck tyre insert

December 1, 2014

SkyRC Motor Analyser brushless motor tester

New from SkyRC comes the Motor Analyser, a device to test and fine-tune electric brushless motors. The motor tester offers KV measurement, voltage, RPM and Amp draw tests as well as timing and hall sensor checks together with a noise level test that allows to draw conclusions on the conditions of the ball bearings. Coming in a sturdy aluminium case the device sports a back-lit display, jog dial menu operation and it includes an array of wires such as a sensor cable, motor connection wires and power input adapters.

Click here to view the specifications

November 27, 2014

GForce Mini Break-in system

GForce introduce the Mini Break-in system for mini and micro-size brushed motors. Designed for the use with Tamiya’s Mini 4WD series of “slot cars”, the system is also usable for the brushed motors found in Kyosho’s Mini-Z or HPI’s Micro RS4 line of vehicles. The motor run-in system is housed in a sturdy case with a jog dial to adjust the output voltage and also a timer that stops the run-in process after a certain time. A non-slip foam pad and a velcro strap prevent the chassis or motor from moving around and the break-in device is powered by four AA-size batteries or an optional power supply.

Click here to view the specifications and more photos

November 27, 2014

TLR 22-4 LRC 2.0 degree & 2.5 degree rear blocks

Available now from TLR and made for the 22-4 4WD buggy are two new rear pivot blocks. Coming in low roll centre specification and with 2.5 and 2.0 degree toe-in setting the blocks are made to free-up the rear end of the buggy compared to the standard 3.0 degree part. CNC-machined from aluminium and coming gun metal anodised the 2.5 degree part is best used on medium bite surfaces while the 2.0 degree part helps to make the buggy rotate better in and out of turns on very high-bite tracks. Source: TLR [tlracing.com]

November 27, 2014

Team Associated B5 series titanium screw sets

New from Team Associated and made for the B5 and B5M are two new titanium screw sets. Containing 66 (B5) or 83 (B5M) high-quality fasteners the sets reduce the overall weight of the buggies while adding some bling and strength at the same time. The various button and flathead screws are also available separately as 4-piece sets to outfit other cars, buggies and trucks.

Source: Team Associated [teamassociated.com]

November 27, 2014

Avid Triad M4 lightweight wheel nuts

Avid introduce the Triad M4 wheel nuts for the use with most 1/10th scale vehicles. The lightweight nuts weigh in at only 0.3g per piece and although they sport a unique 3-corner design they can be cranked down with force when a good quality nut wrench is used. Serrations ensure the nuts stay in place while the available colours of black, blue, orange and red let you highlight your drive. The nuts come in sets of four including an Avid mini decal sheet.

Click here to view the colour variants

November 26, 2014

RDRP Team Durango precision spur gears R2

New from Revolution Design Racing Products come updated spur gears for the use with Team Durango’s 1/10th scale off-road vehicles. The redesigned and wider Revolution2 gears offer improved durability compared to the previous spurs. The increased contact patch with the pinion is especially helpful when using low-turn modified motors while offering exceptional efficiency for stock spec classes. All gears feature machined venting and weight reducing holes to minimise heat build-up when running a soft slipper setting and they come with engraved size markings for easy identification. The gears are available as Stock racing 72T and Modified racing 87T variant.

Source: RDRP [revolution-rc.com]

November 26, 2014

JQ Racing THECar hard suspension arms

JQProducts THECar hard suspension arms

Made for the THECar White Edition 1/8th off-road buggy are the new hard compound front and rear suspension arms from JQ Racing. Using the parts in hot ambient temperatures will add stability and precision but the harder parts are also worth a try in normal temperatures as they can lead to a more stable feel of the buggy. The A-arms are sold as pairs for the front and the rear of the car.

Click here to view the rear arm set