Red RC » P Off Road

January 28, 2015

Vaterra Twin Hammers 1.9 rock racer RTR

Coming from Vaterra is the slightly updated Twin Hammers 1.9 1/10th scale 4WD rock racer RTR kit. The vehicle sports a somewhat scale chassis layout with independent front suspension and a solid rear axle to tackle both high-speed tracks and rock crawling trails. A 2-speed transmission allows to shift on the fly while waterproof electronics make for go everywhere capability. Included with the upgraded kit comes a Spektrum DX4E 2.4GHz computer transmitter with Active Vehicle Control technology that assists with driving in critical situations as well as blue and silver body panels to make the truck stand out.

Click here to view the features and more photos

January 28, 2015

Losi 8ight & 8ight-T petrol off-road RTR kits

During this week’s Nuremberg Toyfair Horizon Hobby introduce their new Losi 8ight petrol buggy and 8ight-T petrol truggy 1/8th scale kits. Both are based on the respective ROAR Gas Nationals winning platforms and they are tweaked to take a 5.1cc petrol engine, allowing them to run longer and require less maintenance compared to their nitro fuel powered counterparts. To better accompany the upgraded power and national championship driving characteristics both also come with AVC Active Vehicle Control technology that allows to drive faster with more control and to get the most out of the power and precision gas vehicles. Rounding out the packages is a 2.4GHz Spektrum DX2E transmitter, a 7.4V LiPo receiver battery pack, a starter box and waterproof Spektrum servos and electronics.

Click here to view the features and more photos

January 28, 2015

Losi 5ive-T Offroad RTR

Losi have introduced the 1/5-scale 5ive-T Offroad RTR. This package comes equipped with an AVC enabled 2.4 GHz receiver on board which together with the included Spektrum DX2E transmitter, you’ll be able to push the limit of a 29CC Losi petrol engine and 1/4-scale servos even from a distance. A solid package, the car features large-bore threaded, aluminium shocks with over-sized 7mm shock shafts, a 5mm thick chassis plate based on the 8ight platform, precision cut or formed, heat treated steel gears throughout the drive train, a powerful 2-stroke 26cc petrol engine and an innovative clutch mount and housing that adds strength and durability and provides unmatched heat dissipation for increased longevity of the 8,000 RPM clutch

View more details & images here

January 28, 2015

Losi Ten SCTE Troy Lee Designs RTR

Horizon Hobby introduce the Ten SCTE Troy Lee Designs RTR 4WD short course truck. Based on the 2013 and 2014 ROAR Nationals winning vehicle the kit offers a factory assembled 4WD shaft-driven chassis, sturdy suspension components and full RTR specifications with a 3900kv Dynamite 540-size 4-pole brushless motor, a 130A LiPo-compatible and waterproof Dynamite speed controller, a Spektrum DX2E 2.4GHz radio set and waterproof Spektrum steering servo and electronics. The truck comes including a pre-painted bodyshell rocking the TLD logo and graphics, black and orange beadlock design wheels and grippy racing tyres.

Click here to view the features and more photos

January 28, 2015

Schelle B44.3 -3mm chassis & B5 uprights

Coming soon from Schelle are some new options for the Associated B5 and B44.3. For the B5 there is a new 2-piece aluminium rear hub. The new design helps prevent the ball being pulled from the upright in an impact, while at the same time being replaceable if it gets damaged. Only 1 gram heavier than the stock part it features molded bearing inserts and allows for fine adjustment of the link position, relative to the upright, through the use of shims. For the 4wd B44.3 there is a new 3mm shorter aluminium chassis plate with corresponding top deck. The new setup helps create more on power traction as well as make the car turn more fluidly in the corners. Finally from Schelle is a small bottle of synthetic bearing oil, which is the same oil used on their ceramic bearings, but can now be used on all your bearings for its very fine low drag characteristics. Comes in a handle bottle with fine tip for precise application.

View more images of the new products

January 27, 2015

MCD RR5 cab forward bodyshell

MCD Racing have a new optional bodyshell for the RR5 large scale buggy available. Sporting a distinctive cab forward design and an aggressive overall appearance the body is meant to produce more front and centre downforce, resulting in a more aggressive steering response. A cutout in the rear section improves engine cooling for better overall performance in hot weather and the body comes with a spark plug protector that keeps away harm from the engine in the event of a roll-over.

Click here to view another photo

January 27, 2015

Team Azarashi B5M prototype bodyshell

Japanese company Team Azarashi have first images of their yet unnamed prototype bodyshell for the Team Associated B5M buggy available. Sporting the distinctive Azarashi lines the body does away with today’s ubiquitous cab forward design in favour of a more conventional looking mid cab appearance. We do not have a release date yet but we bring you more information as soon as they become available.

Click here to view more photos

January 27, 2015

Team Titan H.V. 40mm cooling fan with tabs

Team Titan have a new 40mm cooling fan available that features an open board with solder tabs for the receiver connection wire over the standard fixed wire most of today’s units offer. The high voltage high speed fan comes with an easy to replace 170mm black universal plug wire than can be cut to length to allow for professionally looking wiring jobs.

Click here to view another photo