We received a brief report from the first round of the Belgian 1/10th 200mm Nationals that were run this weekend in Rumst track. Racing in the T2 class it was young Serpent driver Maxim Claes that took the TQ spot and, following a short delay prior to the final, went on to take the win in front of Vazza Doato in 2nd and Leonard Gerard in 3rd.
German Sheperd Velox driver Robert Pietsch has claimed victory at this weekends Spanish EFRA GP at the Valencia track, host of this years European Championships. Starting from the pole position Pietsch had a some problems which dropped him nearly a lap down as his team mate Daniele Ielasi took the early lead. Pietsch started his comeback and was gaining ground due to better fuel economy and when Ielasi ran into problems about 2/3rds of the way into the race, Pietsch took over at the front, in front of Pirani in 2nd and Alberto Picco in 3rd with these 2 swapping places, with Picco having the upper hand until running out of fuel near the end gifting Pirani the 2nd spot. This was how it finished with Pietsch taking the win, 8 seconds in front of Pirani with Picco ending the race in 3rd, a lap behind the leaders.
Click here for final standings… content
We have been contacted by the organisers of this Summer’s Much More UK GP, run in Stonehaven, Scotland,which is shaping up to be a great event. Almost fully booked they only have 18 places remaining in Pro Stock which takes place on June 14th, with similar limited numbers in 5 and 6 cell modified, which are both run on June 15th. They have many RC super stars attending and one very special guest who will be announced shortly. Booking in now is strongly recommended via www.rcracecontrol.com to avoid dissapointment.
We received an update from Valencia Spain, where the Euros warm up event is taking place for 1/8th scale on road and after qualifying it was current German National Champion Robert Pietsch on pole position followed by Shepherd Velox team mate Daniele Ielasi in 2nd. Robert was the only driver to make 18 laps and behind him it was very close with fuel consumption being a big problem for many drivers. The track conditions so far have been very good, with only some light rain drops falling during qualifying but not enough to disturb the racers. The semi finals start tomorrow at 12.15, with the finals expected to begin at 14.30.
Click more for the qualifying top 10… content
Team Associated has a report from the ROAR Region 5 On road Championships, hosted by Summit R/C Raceway, who provided the racers with a fast and flowing layout, with the exception of the S section coming onto the straight. Team driver Walter Hendersen went into the race with only one days testing with the new 12R5 and after a few small adjustments he was ready for the first day of qualifying, where he was able to secure the TQ spots in both Super Stock and Modified, both by over 2 laps. The mains went just as well for Walter, as he used his pole position to great effect, jumping straight into the lead and never looking back, taking both wins.
Source: Associated [rc10.com]
The Spanish EP Touring car Nationals got under way at the weekend at the Villa Real track in the South East of the country, the same venue that will play host to this years European Championships that begins at the end of July. Qualifying for the race saw Toni Mateo take the pole position from Erik Fernandez in 2nd and Gonzalo Garcia in 3rd. In the triple mains it was 4th placed qualifier Marc Esbri Vilar that struck first, taking the win the leg 1 from Toni Mateo, but the Mateo fought back in the 2nd and 3rd leg to take the win in both and with it claim the overall. Marc backed up his win in Leg 1 with 2 second places and claimed the runner up spot ahead of eventual 3rd placed driver Erik Fernandez.
More images from the event can be found here.
Source: Tecrotec [tecrotec.com]
A brief report from the 2nd round of the French Classique Nationals for 1/8th scale flat pan chassis’ that was held at the MACN circuit in Nantes. The race was won by DXF racer Gilles Garrigou ahead of the current French National Champion Bruno Petiot in 2nd also with a DXF, while in the 3rd spot was the DXF designer Marc Dellunto rounding out the podium in 3rd.
More National Championships starting up over the weekend, this time it was the turn of the Belgian 1/8th scale series to get started. Running at the narrow and technical Houthalen curcuit, the racers had dry weather on Saturday for testing, but rain on Sunday meant that everyone had to waterpoof their cars and put on their rain tires and after qualifying it was Kyosho driver Gunther Van Staey that took the pole from Serpent driver D’Hondt in 2nd. In the final, Robin could get into the lead just after the start and thanks to saving his wet weather tyres during qualifying he had the grip to pull out a lead of 4 laps by the end of the 30 minute race from Van Staey in 2nd and Mugen driver Michel Bourgeois in 3rd.
Source: Serpent [serpent.com]
