Red RC

May 31, 2013

Novak Vulcan modified motors

Novak’s newest modified racing 540-size brushless motors have arrived. The Vulcan Mod motors are an all-new motor series from Novak developed to offer a balanced, smooth delivery of power and speed. Vulcan Mod motors take the proven high-RPM stator blank and use new combinations of Novak’s pure-copper Red Wire to offer racers an updated and improved modified motor platform. Not only are the end bells and stators new, but Novak engineers have fine-tuned the winding and wire specifications. This new wire sizing and high-RPM stator have proven to be extremely easy to drive. Vulcan Mod motors work with the entire line of tuning rotors, but include the king of efficiency, the 12.3mm neo rotor.

View the motor’s features here

May 31, 2013

Exotek DEX410 rear hubs & gearbox holders

Exotek have produced a number of new option parts for the Durango DEX410 buggy. First up are heavy duty 7075 alloy rear hubs with vertical ball stud mounting. Durable but machined to be lightweight, the vertical ball stud mounting allows for easy roll center adjustments by adding shims. The included 2mm spacers are designed to match the stock geometry of the plastic hubs for easy set up reference. These hubs have the stock 0 degree geometry. Next up is a heavy duty rear gearbox holder with a new design which has slotted screw openings for easier installation or removal compared to the difficult stock unit. Simply leave the 2 holding screws half way screwed into the bulkheads and then slide the holder on or off and then tighten the screws. Finally there is a heavy duty front gearbox holder with both gearbox holders are made from 7075 alloy for greater durability.

View the other new parts here

May 31, 2013

Ronald Volker dominates Euros warmup race

Last weekend the Euros Warm-Up Race for EP touring cars took place at the Mini-Autodromo Track in Torres Novas, Portugal. Some of the best European drivers attended the race since the weather prediction for the weekend was really good and it was confirmed by some very high temperatures. Ronald Volker was the man to beat since he TQ’ed 4 out of 5 qualification heats and was just beaten in one round by the Awesomatix driver Viljami Kutvonen. In the finals the Ronald show continued and he won all 3 A-mains with Elliot Harper taking the runner up spot and Alexander Hagberg in 3rd.

View the final results here

May 31, 2013

Rain postpones Day 1 of ENS

Fri-Track-620

The much anticipated new Euro Nitro Series will start a day later than originally planned as racers woke to a very wet morning in Hockenheim, Germany, leaving organisers no choice but to postpone Day 1 of the event which should have seen 5 rounds of controlled practice. With the weather down for the day and set to improve mid morning tomorrow, Saturday, it is hoped to be able to get the event officially underway at around lunchtime. Sunday’s weather is giving perfect conditions for racing. Despite this morning’s conditions one driver decided he could do with some wet practice, bravely taking to the track with his touring car but his first attempt on the soaked track lasted just two laps before the engine decided it had consumed enough water. Today’s weather is in total contrast to yesterday’s set-up day when the sun shown down on the home of Formula 1’s European Grand Prix with many drivers including most of the main contenders able to get in some track track time as the host club ran a day of open practice.

May 31, 2013

John Bruins wins Dutch Stock Nats Rd2

Last weekend saw the second round of the Dutch electric track nationals take place at the 2012 electric TC worlds track, The MACH in Heemstede. The worlds chicane proved to be a challenge to many drivers however it was round one winner, Team Kyosho driver John Bruins who would take the TQ honours in the stock class followed by track local Jitse Miedema and reigning Dutch national champion Rob Janssen. With the weather forecast seeming to be a bit dismal and chance of rain high, many drivers came prepared with rain cars however it thankfully remained dry all weekend which resulted in John taking the clean sweep, winning all three finals. Behind him an exciting battle took place with the following three drivers ending up on the same points total. Final times would be tie-breaker in the end which saw Jitse Miedema driving a Spec-R R1 take second place, followed by Rob Janssen and his Tamiya taking third. Serpent driver Ronald Arts came in an unlucky fourth place, just missing out on a podium place.

Thanks to John Bruins for the report.

May 31, 2013

Team Associated Top Gun Shootout – Announcement

Team Associated Top Gun Shootout - Announcement

Team Associated have announced the 2nd Annual Team Associated Top Gun Shootout hosted by SD/RC Raceway in San Diego, California. The two-day event takes place July 6-7th 2013 with qualifying on Saturday and triple A-main events on Sunday. With a large 128′ x 74′ footprint, SD/RC is one of the largest indoor tracks in the nation and is suitable for both 1:10 and 1:8 racing. Scheduled to attend for Team Associated is 4x World Champion Ryan Cavalieri, 2012 Off-Road Shootout Champion Steven Hartson, Team Manager Brent Thielke, Jason Ruona of JConcepts, and many others from across the West coast. For more information and event details, contact Scott Bergen at info@sdrcraceway.com, or visit SDRC Raceway on Facebook.

May 30, 2013

Avid RC TLR22 Triad aluminium topshaft

Avid RC’s new Triad aluminium topshaft is an upgrade for the TLR 22, 22T and 22 SCT to eliminate the special ‘mini’ kit slipper nut and use a standard 5.5 mm hex driver to set the slipper clutch. Born partly for necessity, partly for convenience, racers will appreciate this upgrade as they can go back to using a standard slipper nut. Many Triad customers had issues with TLR topshafts which fluctuated in length and did not allow for proper spring tension on the slipper clutch, this shaft aims to solve that.

Source: Avid RC [avidrc.com]

May 30, 2013

JConcepts 1/8th Spring Nationals report

JConcepts headed to Nebraska for the 4th annual JConcepts 1/8th Spring Nationals at the HobbyPlex in Omaha. The fabulous indoor track was once again filled with the Alex Sturgeon creation to challenge all drivers. The flowing fun layout was definitely busy to keep everyone on their toes, and going consistently fast with no mistakes would be a challenge. The format was Friday practice. With heavy rain on Thursday night and Friday morning, being inside was awesome. More rain on Saturday followed by 3 rounds of qualifying, racing never missed a beat thanks to the HobbyPlex racing circuit. Sunday would be main day to cap off the event.

Continue reading the report here