December 4, 2008

Hot Bodies Moorespeed 908 bodyshell

Hot Bodies, under the Moorespeed label, have released this new 908 bodyshell, which has been designed for 1/12th scale circuit racing. This totally new design was developed from the ground up to be the ideal bodyshell for a wide range of racers and tracks. The air rushing over the bodyshell starts at the ground-level splitter and is forced over the front wheels and around the closed cockpit by sculpted flow channels. Ridges over the front wheels disrupt the air just enough to break it loose over the wheel arches until it flows back down slightly over the middle section of the body. The closed cockpit area helps stabilize the air as it rushes over the midsection, which hugs the battery and electronics area of the car chassis as closely as possible. As the air meets the rear wheels, further ducting and vertical supports direct the air over the rear spoiler, where a huge amount of downforce is created. Molded from crystal clear polycarbonate, it features clear overspray film, a pre-cut vinyl window mask sheet, and a decal sheet with headlights and Hot Bodies logos. Also available in lightweight version.

Click here for more photos…

Source: Hot Bodies []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: