November 3, 2010

Dirtz Dialed Partz X-Factory Torx screw kit

Dirtz Dialed Partz X-Factory Torx screw kit

Brian Kinwald and X Factory have released the newest addition to the Dirtz Dialed Partz line, a torx screw kit to fit the X-6 Squared, X-60, and SCX-60. Torx screws are much less likely to strip out and the drivers don’t wear as much either. In some situations, this allows more torque to be applied than with a regular hex head and in other applications, especially on flat-heads coming up from under the chassis, torx screws are easier to remove and rarely strip. The new kit contains 50 total 4-40 torx head screws, the correct size for almost every screw used on the X-6 Squared, a few sizes are not available from the supplier. Another great thing about torx screws is that cap head and flat head use the same driver, T-10. Therefore, you can do most work on the car with just one driver, a real convenience in a crowed pit space.

Source: X-Factory []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: