August 18, 2011

Losi MSC-MXPro brushless controller

Also new from Losi is the MSC-MXPro brushless controller for 1/10 designed for Short Course trucks and any other application that allows the use of slightly larger controllers. The Fwd/Brk/Rev speedo is usable with an input voltage of 5.5 to 25.4V, has no motor limit when used with 540-size motors and sports an adjustable BEC voltage. The controller comes pre-wired with 13 Gauge wires, EC3 battery and 4mm bullet type motor plugs.

– Forward: Yes
– Reverse: Yes
– Brake: Yes
– Time Delay Brake: Yes
– Input Voltage: 5.5V-25.4V
– Input Connector Types: EC3
– Output Connector Types: 4.0 Bullet Plugs
– Motor Limit: No Limit (540 Size Motors)
– Length: 47.0mm
– Width: 38.7mm
– Height: 32.2mm
– Weight: 80.2g
– BEC Voltage: Programmable
– PWM Frequency: 12Khz
– Overload Protection: Yes
– Full On Resistance: .300 Ohms
– Wire Gauge: 13AWG
– Auto Cutoff: Yes

Source: Losi []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: