New from CRC is a batch of products designed to make your Gen-Xi, XL, X10 and X10LE more adjustable, rigid, strong and true. CRC has a line of carbon fibre front end braces for both 1:12th and 1:10th Gen-X cars. For the 1:12th car, there are 2 different braces, the wide brace for the short arm and the narrow brace for the long front end arms. In addition to an increase in stability, the brace keeps the front end aligned in big crashes. Finally there is extended rear shock mount top plates for the Gen-Xi. The new Gen-Xi features optional rear shock positions and you can utilize these positions by lengthening the shock. Or these new extended rear top plates can be used to move the rear shock forward in .25 inch and .5 inch increments. Typically, when the rear shock is mounted more forward, more mid and exit steering is achieved. It is a quick simple change that can be done to alter the handling of the car. Sold as a set of 2. With .25 inch and .5 inch movement that matches the hole pattern on the Xi.
Next up are these reverse/flat servo mount plates for the Gen-X10 and 10LE which allow for more room to move the battery back and forth in the CRC Gen-X 10 and 10LE. The servo is now flipped to the front and mounted flat, lowering the CG and lightening the car. Also for the same cars there is a new 3-piece Multi-brace for the ProStrut Front which features adjustable width to handle the medium (standard) and wide width front end placement as well as provisions for long and short arms. Much like the 10th scale version, a front end brace is a great benefit for high grip applications.