September 22, 2015

Reflex Racing RR12V2 1/12th scale pan car kit

Reflex Racing RR12V2 1/12th scale pan car kit

Following the recent introduction of the RSD RR12V2 conversion kit, Reflex Racing now also released information on the RR12V2 full kit. The car is based on a new chassis made of 2.3mm quasi weave carbon fibre for improved stiffness, a lower weight and a lower centre of gravity. An updated pod geometry with the pivot 2mm further forward provides more corner speed and less lift while allowing for more aggressive settings. Also new is the battery securing systems that provides tape-less transverse of inline mounting of the 1S pack. Another new feature is a revised side spring placement with optional, more in board positions to aid in a softer roll control for high bite conditions. Lastly, the new front end is Reflex Racing’s icing on the cake. A new, light weight double A-arm front end is included in the kit. This system is incorporating a suspension system that is 10 to 15g lighter than the traditional AE front ends, it is easier to adjust and versatile enough to run as a double A-arm or traditional reverse McPherson strut. The car will be offered in two trims, as full kit minus electronics, wheels, tires, servo saver and fluids and also as full conversion including RSD front end. The latter needs a donor car for diff, tubes, shock, and ball ends.


Reflex Racing RR12V2 1/12th scale pan car kit

Reflex Racing RR12V2 1/12th scale pan car kit

Reflex Racing RR12V2 1/12th scale pan car kit

Source: Reflex Racing [reflexracing.com]



Usage

If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: