Coming from SMC and made for the Yokomo YZ-2 2WD buggy are two brass weights in the form of front rear pivot plate and the front motor plate brace. Designed to adapt the car to lower bite conditions the brass weights will make for a less aggressive forward weight distribution by adding weight to the rear end without harming the buggy’s mid corner speed. The front rear pivot was designed to take up all the space between the transmission and the motor while still providing critical anti-squat clearance with or without the kit shim. SMC pushed the block into all the nooks and crannies they could and not simply copied the design of the standard part with this resulting in a whopping 68g or rearward weight shift. The front motor plate brace in the kit is a small aluminium L brace, but the new part filled up the space under the waterfall as much as possible. Full motor displacement is still available, as well as clearance for the rubber pad under the brace with the motor plate attachment hole is still usable too. The motor brace place weighs in at 34g and the two parts are available separately or as combo kit.