December 22, 2015

Hitec X2 700 multi-chemistry dual output charger

Hitec X2 700 multi-chemistry dual output charger

Hitec’s X2 700 Multicharger is a high-performance dual output multi-chemistry charger for the use on 11V to 30VDC power sources. It features two 700 watt output ports – delivering up to 30A charge current –  for increased capacity while supporting all battery chemistries, including the latest LiHV cells. The microprocessor control and Hitec’s free Charge Master software allow for full PC control of the charger through its integrated USB port, from basic setup to full software analysis of the battery’s health and performance. The new Synchronous Mode has the second output port automatically mirror the channel one settings to charge multiple similar batteries with minimal setup time.

– Twin channel charger with two independent circuits
– Input power source: 11-30V DC
– DC mode output: 700W port A; 700W port B
– Total maximum output: 1400W
– Charge Master software for PC interface
– Synchronous Mode for setting both charge channels thru channel one

– DC input voltage: 11 – 30 Volts DC
– Total charge circuit power: 1400 Watts (700 Watts x 2)
– Charge current range: 0.1 – 30.0 Amps x 2
– Discharge current power: 30 Watts x 2
– Discharge current range: 0.1 – 5.0 Amps
– Current drain for LiPo balancing: Max 800mAh per cell
– NiCd/NiMh battery cell count: 1 – 20 cells
– LiPo/LiHV/LiFe/LiIon cell count: 2 – 8 cells
– Pb battery voltage: 2 – 24 Volts
– New Weight: 1220g
– Dimensions: 200 x 140 x 55mm

Source: Hitec []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: