Coming from Protoform and made for most touring car bodyshells is the new Body Support Foam set. Designed to eliminate the gap and play between the car’s foam bumper and the inside of the body the blocks and strips keep the front of the body supported for both increasing durability and keeping the aerodynamic integrity of the body intact. Each set comes with four blocks and four strips with super-sticky adhesive backs. The blocks are 9mm thick and are a quick solution to pad bodies in extremely forward mounting positions, as seen in 1/10th touring cars, and also works great with bodies that have a long front overhang. The 2mm thick strips can be used to fine tune this gap in smaller increments and can be cut and stacked on one another. The foams can be added both to the foam bumper or to the bodyshell.