Coming from Radtec is a new kingpin and steering block tool that allows to perfectly align the kingpin threads in composite steering blocks. The tool utilises a specially designed tip with an M3 thread on the upper end while the plain lower part slides into the steering block’s lower kingpin hole, ensuring the thread is cut at a perfect angle. By rotating the steering block the opposite thread can be cut. On top of having the two holes aligned, which will eliminate unwanted misalignment and friction, the tapping will also ensure easier assembly of the steering knuckle and C-hub area. The tool uses a machined aluminium handle and a titanium-nitride coated tool tip and it will hit stores very soon.