May 12, 2017

RPM B6 mini & wide front bumpers

RPM have introduced two front bumpers for the Team Associated B6 buggies. First up is a mini bumper that replaces the stock hinge pin retainer. It provides roughly 25mm of forward extension and nearly 49mm of width to help protect the front end of the vehicle. That means direct frontal impacts won’t transfer 100 percent of that damaging impact energy into the front bulkhead, chassis or shock tower. The mini bumper weighs in at a mere 7.5g and it is moulded from RPM’s own nylon mix.

Also new for made with the basher in mind is the wide front bumper for the B6 series of buggies. The bumper spans a full 114mm and extends in front of the chassis by 38mm on a 45 degree angle. It also extends below the level of the chassis by 0.5mm to help reduce the amount of scuffing and damage taken to the front of the stock aluminium chassis plate.

Source: RPM []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: