December 20, 2017

ProTek Graphene LiHV & lightweight RX battery packs

AMain Hobbies have introduced two new Silicone Graphene LiHV battery packs as well as a lightweight LiPo receiver battery. Starting with the LiHV packs, first up is the 2S 7.6V 100C Silicone Graphene LCG pack with a capacity of 5600mAh. It measures 138.5×46.5×22.5mm, weighs in at 245g and comes in handy in all applications that require a medium capacity and lightweight battery. The hardcore battery utilises 5mm bullet-type power connectors and a standard 2mm balancer tube.

Next up is the 4S 15.2V 100C 5600mAh Silicone Graphene LCG pack for 1/8th applications. Built using the same high-quality LiHV cells as above’s 2S pack, the battery comes in handy in all 1/8th scale applications that allow the use of a brick-type battery. The low-profile design with a height of 38.5mm saves weight – the pack weighs in at 460g – while lowering the overall centre of gravity of the vehicle. Like the 2S pack the 4S battery can be charged to 4.2V or 4.35V per cell, the latter further increasing the battery’s performance in outlaw classes. The hardcore battery utilises 5mm bullet-type connectors and coming including a 4S balancer harness. Last but not least comes the new ProTek lightweight 7.4V 1600mAh receiver battery. Offering smaller dimensions than usual and being specially developed for Mugen, Team Associated and Xray battery boxes it is also usable with Serpent an SWorkz buggies and trucks and also with most Sanwa transmitters. The soft case pack weighs in at 58g and measures 88.5×25.2x13mm.

Source: AMain []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: