February 1, 2019

R1 Digital-3 brushless speed controller

New from R1 Wurks comes the LCG Digital-3 2S/1S wireless programmable brushless speed controller. Developed using the most advanced microchip processor and a robust proprietary software, the speedo delivers some of the most technologically advanced features to date. Development of the LCG controller was focused on ultra smooth power delivery needed for modified racing as well as supreme power efficiency for stock motors. The unit features an A.C.L.C. Advanced Component Level Cooling system. This design allows individual encapsulated low resistance Mosfets – inner and outer components – to transfer heat directly to the upper heatsink. The system also comes equipped with an all new zero timing blinky mode for spec racing, using an advanced commutation algorithm called Cool Power to keep the motor cool and deliver powerful, yet ultra-smooth acceleration. The LCG Digital-3 boasts a redesigned case minimising overall weight and lowering the centre of gravity. R1 Wurks have minimised the weight from the upper case while improving heat dissipation, achieved by improving air velocity exits from all sides of the ESC case. All adjustable settings are easily programmed using the R1 Wireless Adapter coupled with an iOS or Android app designed with an intuitive, easy to use interface. The new R1 Digital-3 app also features a super-fast live telemetry and a built in datalogger for after race analysis. Built in Amp draw meter for setting motor timing or for after race analysis. Using the new over the air updates feature, firmware updates are now easily downloaded through our iOS or Android apps.

– LCG full aluminium case and heat sink design
– Full compatibility with modified and stock racing
– Superlative FET and low-resistance power PCB design
– 30mm fan for maximum cooling
– Cool Power software/hardware upgrades increase speed while reducing motor temperature by modifying the commutation algorithm
– The Built-in 1S/2S booster BEC has a Maximum voltage of 6V and 7.4V, making it easy to operate a variety of servo without the need for a separate receiver power supply
– New Auto Turbo / Boost timing setting and delay time setting
– New X-Lock brake response mode and PWM / brake frequency allows various race and control types
– Data port for connecting to Wireless adaptor
– Wireless adaptor allows program parameter settings and firmware upgrades
– Live ESC and motor telemetry (speed, temperature, current, voltage, RPM and battery consumption) can be stored in real time with the data log

– Motor type: Sensored / 2-4 Pole Sensored
– Motor limit: >3.5T
– Operating voltage: 3.7-7.4V (1S-2S)
– Forward/Brake/Reverse
– Full aluminium case/heatsink
– Typ. Voltage Drop @20A per phase: 0.0048V
– Rated Current per phase: 220A
– Plugged 30x30x10mm fan: yes
– BEC Output: 6V/7.4V bulit-in DC Booster, Continuous Current of 3A
– Multi-Protection-System: yes
– “Boost 0” Mode: yes
– Multi-frequency system: yes
– Power Wires: 12AWG
– Over the air updateability: yes
– Case Size (without fan): 32.9 x 34.6 x 21mm
– Weight (without cable): 47g

Source: R1 Wurks [r1wurks.com]


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: