May 20, 2019

PR Racing S1 V3R Evo 2WD buggy kit

Coming soon from PR Racing is the S1 V3R Ev0 2WD buggy kit. The main focus has been to make the car smoother and easier to drive on track, and this has been achieved with a revised 2.5mm thick -5mm length 7075 aluminium chassis. In addition new insert-type hangers have been introduced, and in conjunction with the chassis design allow for much lower rear roll centre, keeping the car much flatter on track with smoother rotation. New Ackerman geometry, and new CNC rear hubs with longer link positions also improve on track driveability. A new motor mount has been produced to lower the motor 2mm into a recess in the chassis, and makes a particular difference on today’s high grip tracks. In addition to all the geometry and mechanical changes, the V3R Evo has been treated to a new body, designed to look sleek and offer more steering with its much larger forward mounted cabin. The kit comes with a host of optionals such as CNC alloy servo mount, 4 degrees alloy caster blocks, front camber plates, vented slipper plates, a swaybar set and 34T alloy idler gear and it will hit stores in June.

New features:
– New 7075 2.5mm thick -5mm length chassis
– New RR and RF hangers with pills
– New CNC aluminium rear hubs
– New low mount (-2mm) motor plate with spur protector
– New Ackermann plate
– High tensile turnbuckles – Ultra strong
– New sleek body
– New grey rod ends and shock absorber plastics
– New foam battery spacers
– New ZZ ball bearings
– Steel front Axles
– Aluminium +5mm, 3 degree front kick up block

Source: PR Racing []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: