July 26, 2019

RC Maker AM19-2 upper bulkhead support stiffeners

Coming from RC Maker and made for the Awesomatix AM19-2 upper bulkheads are carbon fibre stiffener plates. Constructed from very stiff 0.5mm carbon, then are extremely lightweight and provide increased rigidity to the “ears” on the upper bulkheads where the camber link mounts. In awkward collisions with boards on tight, twisty tracks, these ears can bend when hitting boards or barriers and throw our the camber and caster, and are sometimes quite difficult to detect at first. These will help prevent these upper bulkheads twisting by providing an extra layer of supper bridged between the camber link ball-stud and bulkhead screw. Being only 0.5mm thick, they do not need a longer screw in the bulkhead, however if owners want to, this will further increase rigidity. The stiffeners are able to stay on the car when removing diffs etc, and are held in position by the camber link ballstuds. The stiffeners are available in 8-piece packs from now on.

Source: RC Maker [rcmaker.com.au]


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: