RPM Tenacity SCT/DB/T chassis skid plates

Coming from RPM is a new skid plate set for the Losi Tenacity SCT, DB and T vehicles that helps to bulletproof the popular trucks. The front and rear skid plates are designed to fit both the moulded chassis version of the Tenacity as well as the aluminium chassis option. A key breakage area of the moulded Tenacity chassis is the area located just behind the front bulkhead mounting screws. By tying together the four bulkhead mounting screws with the two screws holding the steering mounting posts in place, the plate beefs up the strength and durability of the entire front end of the chassis, helping to reduce that pesky breakage problem while adding some much needed abrasion resistance to the chassis. As for the aluminium chassis, the skid plates will not only increase the longevity of the valuable alloy main plate, they will also significantly reduce the amount of scuffs and scratches it will receive since the skid plates are the lowest impact point on the chassis. Out back, the rear skid plate adds some much needed abrasion and wear protection for both the moulded composite and aluminium chassis. Drivers will also encounter less build-up of dirt and debris between the chassis and the lower rear bumper mount since the rear skid plate sits lower than the bumper mount. Both the front and rear skid plate are moulded from high-quality nylon material for durability and they come including mounting hardware.

Source: RPM [rpmrcproducts.com]