March 19, 2020

GForce GD250 stand alone discharger

GForce from Japan have introduced their new GD250 stand alone discharger for 2S to 8S LiPo and 2-cell to 30-cell NiMH battery packs. With its 250W power circuitry it allows for up to 35A of discharge current with a 2S LiPo or LiHV battery pack, enough to swiftly discharge a fully charged battery down to storage voltage or to check a pack’s condition under heavier loads that the discharge function of a charger can supply. A display allows to monitor voltage, current and capacity in real time. The discharger can be coupled with a Windows PC and by using GForce’s GF Batt Manager software more details can be obtained from the discharge process – however the software is only available in Japanese language as of yet.

– Discharge voltage: 5.4-35.0V
– Low voltage alarm: <5.2V
– High voltage alarm: >35V
– Maximum discharge output: 250W
– Discharge current setting range: 0.01A-35.00A
– Current consumption in sleep mode: <100uA
– Standby current consumption: ≤35mA
– Current display tolerance: 0.01-10.0A ± 60mA, 10.0-35.0A ± 3%
– Voltage display tolerance: 5.40-10V ± 80mV, 10-20V ± 120mV, 20-35V ± 160mV
– Capacity display tolerance: ± 3%
– Size:: 136.6×104.8x107mm
– Weight: 879g

Source: GForce []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: