The new ‘The Ring’ muffler support from RC-Project is made in Ergal 7075 T6 in Italy and can be mounted on all 1/10 and 1/8 Nitro models and is available in 6 different colours. The muffler support will allow you to have 2 different configurations, fixed or mobile. In fixed mode, in addition to the central fixture of the muffler, 2 additional M3 setscrews can be added to secure the muffler fixing with the spring and avoid unpleasant problems due to the setscrew coming loose and the muffler coming away from the spring. In mobile mode it will be possible to eliminate the central fixture of the muffler and leave only the 2 setscrews. In this mode the muffler will have the freedom to be able to move inside the support, which will help the free movement of it according to the bending of the chassis. Inside the space between the muffler and the support you can insert O-rings or a silicone tube to dampen the movement. The spring made of harmonic steel, has a length that adapts to all models and it can be shortened and bent according to your needs.