April 8, 2022

JConcepts Landmines pre-mounted for Traxxas UDR

JConcepts now offer their Landmines performance scale tire for the Traxxas UDR. Available pre-mounted on the new Tremor Traxxas UDR front & rear wheel, which is also available seperately, the design starts with a robust carcass carefully shaped and sized for a multitude of conditions and capable of bashing those difficult courses while being down-to-earth enough to carry a scale appearance. The team spent considerable time with the split-block center design which has been sliced, stepped, and recessed for flexibility and contortion over sharp, loose, and polished surfaces. The Landmines have alternating solid and cavity pads which is ideal for transitioning from smooth dirt or pavement into dirt, mud, and rocky terrain. Moving toward the edges of the carcass, the tire has horizonal grippy pads with edge and channels to provide additional forward bite. Down within the tread, a lightning pattern, knob plots and connector bars pull the design together to work together at shallow and deep sinking positions. Once power is applied to the vehicle, the tread spacing opens which allows for deep digging, making it a great working tire in dirt and muddy conditions. As the tread rolls down the sidewall, a whole new course of tread and side-lugging is applied. A grippy radial ring provides a consistent rubber contact patch in high-speed conditions while in the vertical plane, new traction bars alternate between angular and island mapping for additional grip.

JConcepts is proud to introduce the Tremor wheels for the Traxxas UDR featuring a compatible 2.2 x 3.2” wheel design. The Tremor is a 2-piece 17mm hex wheel assembly that allows a mock bead lock face to connect to the main wheel structure via heavy-duty hardware. The interlocked look of the 5-star pattern is highly sought-after by the 1:1 fanatic and the strength built inside is, of course, RC basher approved. The outer faux bead lock looks real and has a notch and cut-out pattern appearing very industrial. The mock bead lock has multiple location bosses which align with heavy recessed areas in the wheel. Engage the parts, ensure the bead lock part is sitting completely into the recessed area on the wheel and add the 2 x 6mm hardware to secure the build. Add the 17mm replaceable hex adaptor with included 3 x 10mm hardware for increased security. The wheels are produced in a durable material and a detailed molding practice to ensure quality and extended life.

Source: JConcepts [jconcepts.net]


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: